Pura Vita Phenolic-Backed Real Wood Veneer for Curved Work and Custom Components
The SALT International Pura Vita PVQS06 Quercia Spazzolato is a phenolic-backed loose real wood veneer sheet supplied in a 49 inch by 120 inch format, 1.3 mm overall thickness. The Natural Rift Cut Light Oak Wire Brush finish combines a straight, even rift-cut grain with open wire-brushed pore texture, giving fabricators a real-wood surface that can follow a form, wrap a column, or cover a countertop edge that a panel program does not reach.
Key Features
- Real rift-cut light oak face — the rift-cut method keeps grain lines tight and parallel, avoiding cathedrals and ray fleck for a clean, contemporary look.
- Wire-brushed open pore texture — the brushing process removes soft early wood, leaving a deeply tactile surface that reads as natural timber under raking light and to the touch.
- 1.3 mm total sheet thickness — the sheet is 0.5 mm of real wood veneer over a 0.8 mm phenolic backer, keeping the stack light while the backer stabilizes the leaf for machining and bonding.
- 49 inch by 120 inch sheet size — a format sized for tall door components, countertop runs, and column wraps where a panel sheet cannot be applied.
- Phenolic carrier — the backer supports the veneer leaf through cutting and pressing, then bonds flat against the substrate with standard contact cement or vacuum press adhesive.
- Part of the Pura Vita collection — designed to coordinate with Pura Vita prefinished veneer panels in the same color, extending the program to surfaces the panel size does not cover.
Where This Sheet Fits in the Job
Phenolic-backed loose veneer exists to solve one specific problem: a panel program covers the flat carcass, but the job also has radiused components, site-applied countertop edges, or shaped parts that a 49 inch sheet will not wrap on its own. This sheet handles all of those. Bond it over a curved form on a reception desk, press it onto a countertop substrate to carry the Quercia Spazzolato color onto a horizontal surface, or use it to veneer a shaped end panel where cutting a prefinished board would expose core at the radius. The 120 inch length accommodates a standard-height run without a seam.
The rift-cut grain pattern is particularly suited to applications where multiple leaves meet side by side. Because the grain lines run straight rather than fanning out into cathedrals, adjacent sheets read as a continuous surface rather than a series of individual panels, which matters in long runs of open shelving or flush-front cabinetry.
Material and Finish Construction
The face is real light oak, sliced on the rift to produce the narrow, straight grain that is the defining characteristic of contemporary architectural woodwork. Wire brushing opens the soft early wood deeply enough that the texture is unmistakable by hand, not a light surface treatment. The total sheet thickness of 1.3 mm breaks down as 0.5 mm of oak veneer over a 0.8 mm phenolic backer. The backer is what makes the sheet manageable — it stabilizes a thin veneer leaf that would otherwise be fragile in handling and prone to movement during bonding. The phenolic carrier bonds with the same adhesives used for HPL, so the sheet integrates cleanly into a shop workflow already set up for laminate work.
Natural variation in grain tone and character is inherent to real wood. No two sheets are identical, and a run of adjacent sheets will show the tonal range of the timber. Order together and rack the sheets before bonding to preview the sequence.
The Fabricators and Projects This Sheet Is Built For
Custom cabinet shops and architectural millwork firms are the primary buyers. A shop running Pura Vita prefinished panels on a project will reach for this sheet when the design adds a curved component, a laminated countertop edge, or a shaped feature panel that the prefinished board cannot cover. Interior designers specifying a natural-wood finish on a commercial fitout will find the rift-cut oak works where a more figured wood face would read as too informal. The 49 inch by 120 inch format suits fabricators who need coverage beyond the standard 4 by 8 footprint, and the phenolic carrier means a shop already running HPL press work can process this sheet on the same equipment.
Frequently Asked Questions
Is this the same surface as the Pura Vita prefinished veneer panel?
The face species, color, and finish treatment match the Pura Vita prefinished panel in PVQS06 Quercia Spazzolato. The construction is different: the prefinished panel is real wood veneer pressed onto a rigid board, while this sheet is a thin veneer leaf on a phenolic carrier that the fabricator bonds to their own substrate. Use this sheet where the panel size or rigidity does not fit the component.
What adhesive system does this sheet require?
The phenolic backer bonds with contact cement or under vacuum press with a compatible adhesive, the same systems used for standard HPL. Confirm the adhesive is appropriate for the substrate you are bonding to.
Can I cut this sheet on a panel saw?
Yes. The phenolic backer keeps the sheet rigid enough to run through a panel saw or score-and-break setup. Orient the face down on a scoring saw to protect the oak surface from tearout, and use a fine-tooth blade.
Will the grain and tone match exactly between this sheet and the prefinished Pura Vita panel?
The species, cut, and finish treatment are the same, so the overall character will coordinate. Real wood varies naturally between individual sheets and panel runs, so a seamless color match at a joint is not guaranteed. Where the two surfaces meet at a visible joint, sequence the sheets before committing the layout.
Is this sheet suitable for exterior applications?
No. This is an interior surfacing material. Real wood veneer and phenolic-backed sheets are not rated for exterior exposure.
Real Wood, Fabricator-Ready, Sized for the Full Job
The Pura Vita PVQS06 loose veneer sheet brings authentic rift-cut light oak to the components a prefinished panel cannot reach, so the whole project reads as one material from flat carcass to shaped detail.
