Vetta-Finished HPL Sheet For Surfaces That Take Real Wear
The Saviola High Pressure Laminate in color GS40R Fantasia is a 0.9 mm HPL sheet sized at 73 inches by 120 inches with a Vetta finish, designed to be bonded to a substrate by the fabricator. It is the matching companion sheet for Saviola TFL panels in this color, carrying the Fantasia decor onto countertops, high-wear vertical surfaces, and any component the panel program cannot cover on its own.
Key Features
- 73 inch by 120 inch sheet size suits wide cabinet runs and full-height vertical surfaces without a seam.
- 0.9 mm thickness is the standard HPL gauge for vertical and countertop bonding applications.
- Vetta finish delivers the specific surface texture and sheen the Saviola collection is built on.
- GS40R Fantasia decor matches the Saviola TFL panel program so face and edge read as one continuous surface.
- High pressure laminate construction is manufactured separately from the substrate, then bonded down by the fabricator for a durable, hard-wearing face.
Where This Sheet Fits the Job
HPL is the right call when a surface needs to survive daily contact and cleaning that a thermally fused face was not built for. Countertops, reception desk tops, retail fixture faces, and post-formed work all benefit from the harder, denser construction HPL provides. This sheet also solves the continuity problem on a Saviola panel job: when the TFL panels cover the carcass and doors, this HPL carries the Fantasia color onto the countertop, so the whole installation reads as one material rather than two close matches trying to agree.
The 73 inch width is the broader of the two sheet sizes stocked for Saviola HPL. Cabinet shops that run wide horizontal pieces or oversized slab door faces can work from a single sheet rather than seaming two narrower ones. For shops whose equipment cannot handle a 73 inch sheet, the 60 inch by 120 inch version of this color is also stocked.
Construction and Bonding
High pressure laminate is not fused to the board at the panel plant. The fabricator bonds it down using contact cement or a press, which means edge preparation, adhesive choice, and press time all affect the finished result. At 0.9 mm, this sheet works with standard HPL bonding practice on a flat substrate. The Vetta finish is present on the decorative face; the reverse is the standard sanded kraft back. Trim and profile after bonding to the panel thickness used on the job.
Who Orders This Sheet
Cabinet shops running a Saviola TFL job are the primary buyer: they need this sheet to close out countertops, shelves, and accent faces the panel program leaves uncovered. Commercial millwork shops specifying a coordinated color across vertical and horizontal surfaces will find the 73 inch width gives them more options at the table saw. Designers who have specified GS40R Fantasia throughout a space can use this sheet to extend the decor into countertop and built-in details without introducing a second color family.
Is this sheet the same color as the Saviola TFL panel in GS40R Fantasia?
Yes. The HPL is produced to match the Saviola TFL program in this decor, so the two surfaces coordinate when installed together. Natural batch variation is inherent in any manufactured surface, so ordering samples before committing a large job is always sound practice.
What substrate does this HPL bond to?
Standard practice is particleboard, MDF, or plywood, prepared and bonded per the adhesive manufacturer's instructions. The sheet does not come pre-glued and requires a press or contact cement application in the shop.
Why does Saviola HPL come in two sheet sizes?
The 73 inch by 120 inch sheet covers wider components without a seam, while the 60 inch by 120 inch option fits shops whose equipment cannot process the wider panel. Both are stocked in GS40R Fantasia, so the right size depends on what your saw table and handling setup can manage.
Can this sheet be used for exterior applications?
No exterior or wet-area approval is documented for this product. Keep it to dry interior work.
A Complete Color Story, From Cabinet to Countertop
When the TFL panels cover the carcass and the HPL closes the top, the job ships as a cohesive finish rather than a patchwork of close approximations. GS40R Fantasia in the Vetta finish gives that continuity in a single stocked color.
