Home
Table Saws
Shop Martin Machines

Martin Machines T75 PreX Sliding Table Saw

Item # MART75-PREX
Mfr # T75-PREX
$86,500.00
/Each
Freight: $5,850.00
Qty /
Min Order: 1
Qty mult. by: 1

This item may incur additional shipping costs and lead times.

Product Details

When you want to bequeath a classic to the next generation today.

  • We have built a lot of innovations into this premium machine, so that you have complete freedom. With the T75 PreX, for example, you have the freedom to perform each angle cut on the cross-cut fence and rip fence exactly as required for your tasks and the workpiece being machined. You can do this because for the first time we have combined a cutting height of more than 200 mm with a tilting range of 2 x 46°.

Increased time savings and greater convenience when working.

  • The T75 PreX supports you with its modern 10.4" touchscreen control system of the highest performance level. This modern machine operation ensures the machine is simple to use and helps you to calculate workpiece dimensions or angles, for example.

The powerful cut up to 204 mm height.

  • A powerful, continuously adjustable speed-controlled 7.5 kW motor option ensures that the remarkable cutting height can also be used effectively. Even at 11 kW motor rating, the saw blade is adjusted to an accuracy of 0.01° – just as you would expect from a MARTIN. The T75 PreX offers a tilting range of 92°, which can be used accurately, reliably and quickly thanks to the new DualDrive system.

Quick, precise, flexible. The rip fence.

  • In order to be able to move the fence of the T75 PreX quickly and easily, you only need to press a button on the fence and easily move it to the desired position based on the digital display. However, we recommend equipping the T75 with the optionally controlled rip fence, which effectively supports the cutting width through quick and accurate positioning. The intuitive operation via the touchscreen control system reduces dimensional errors and contributes significantly to perfect cutting results. The fence is intricately and accurately guided by four solid grooved ball bearings. This design ensures maximum durability and thus angular accuracy with constantly smooth running. The stable fence moves freely over the table without support and remains unaffected by dirt and chips on the table.

Cross-cut fence with 2-point system.

  • All T75 PreX machines are fitted with the proven MARTIN 2-point cross-cut fence as standard, which allows workpieces to be aligned at two poits along the fence extrusion. This is the only way to cut precise angles on slightly concave sections due to tensions in the panel. Thanks to the easy-to-read scale (due to built-in magnifier), and standard fine adjustment function for the inner stop element, cutting lengths of 255 – 2,025 mm can be set quickly and extremely precisely. Using the quick clamp you can quickly switch between measures and using the pull-out fence you can cut lengths up to 3,365 mm.

Angle cutting system RadioCompens.

  • The RadioCompens innovative, patented angle cutting system vastly extends the possibilities of the mitre cross-cut table. The radio-based communication between cross-cut table, controller and stop elements reduces time-consuming setup times for angle cuts by up to 80%. Your simply set the mitre cross-cut table to the desired angle and the electronic cutting length displayed on the cross-cut fence immediately shows you the correct length. Even the saw blade thickness is automatically taken into account and you always cut perfectly

The T75 PreX sliding table.

  • The MARTIN hardened steel guide system has been used as the sliding table guide since 1959. The unbeatable technical advantage of this system is the permanent smooth and precision guidance of the table. Some in our industry view the fact that the hardened steel guide strips are permanently lubricated in oil to be a disadvantage. On the contrary, it is a mark of quality as it is the only way to make sure that the surfaces are unaffected by dust and chips. The hardened guide strips are cleaned every time the operator strokes the table and is the only way to permanently ensure a smooth and easy movement of the sliding table over time. The table lip that is bolted to the main sliding table extrusion makes it easy to repair damage caused by deflected saw blades. The table can be locked down every 20 mm along the length of the machine.

T75 PreX cross-cut fence with blow-out block

  • The cross-cut fence of the T75 PreX was barely affected by doubling the tilting angle of the saw blade to 92°. You receive a high-quality cross-cut fence that can be pushed back to a safe position when you tilt the saw blade to the left. This way it makes room for the blade guard that now protects this space. Thanks to the clever design of the extension mechanism, its blow-out block can be used as backing plate regardless of where the fence is positioned. The T75's cross-cut fence has a perfect contact surface for short workpieces even if it is pushed back into the safety position. This way your cutting results are always perfect

Specifications

Box Quantity1
Product Type
Maximum Cutting Length
Table Height
Height
Width
Number of Teeth
Length
Horsepower
Voltage
Blade Diameter
Arbor
Phase
Maximum Tilt
Table Size (In.)
Table Height from Floor (In.)
Style
Distance Between Sliding Table and Blade (In.)
Prewired Voltage (V.)
Maximum Diameter of Dado (In.)
Speed2800 RPM
Maximum Rip Left of Blade (In.)
Maximum Width of Dado (In.)
Motor Power7.5 kW
Saw Blade Diameter550mm
Table TypeSliding
Maximum Rip Right of Blade (In.)
Motor Voltage (V.)
Dust Port Outside Diameter (In.)
Miter Gauge Type
Table Size with Full Extensions (In.)
Table T-Slot (In.)
Motor Phase
Arbor Diameter (In.)
Recommended Circuit Size (Amps.)
Dust Collection Minimum CFM Required (CFM)
Motor Current (Amps)
Table Size with Extensions (In.)
Maximum Depth of Cut at 90 Degrees (In.)
Maximum Depth of Cut at 45 Degrees (In.)
Table in Front of Saw Blade at Maximum Depth of Cut (In.)
Warranty
Cutting Height204 mm +45°: 134 mm - 45°: 125 mm
Main Saw Blade ChangeProLock
Saw Blade ThicknessMax. 6mm
Cutting Width850mm
Sliding Table Length3.0m
Control10.4" touchscreen
Display Resolution0.1 mm | 0.01°
Control Panelat eye level, inclined, 2x rotation
Cutting angle/heightcontrolled
Cutting Width Controlmanually, by scale including digital dimension indicator | optionally controlled
Extraction Connection120 mm on frame | 100 mm on guard
Saw Blade Tilting Range46°