1/4" x 2-1/2" Spektra Up-Cut Long Composite/Fiberglass/Phenolic Spiral Router Bit, 3-Flute, 1/4" Shank
Item # AN46094-K
•Mfr # 46094-K
$46.79
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Amana Tool's modern materials finishing geometry (MMFG) incorporates high shear multi-flute and a Spektra coating designed for the ultimate combination of finish and tool longevity in aerospace materials. Modern-day materials present challenges to the fabricator using these special multi-flute edge tools featuring Spektra coating addresses these challenges with a winning geometry combination. 3/4" of cutting height
Excellent for cutting:
• Plastic
• Acrylic stone
• Aluminum
• Acrylonitrile-butadiene-styrene (ABS)
• Carbon fiber reinforced polymer (CFRP)
• Composite
• Corian
• Coroplast*
• Fiberglass
• Fiberglass PCB board
• HDPE
• High impact polystyrene (HIPS)
• Low density polyethylene (LDPE)
• Phenolics
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate (Lexan™)+
• Polyethylene terephthalate glycol-modified (PETG / PET-G)
• Thermoplastic polyolefin (TPO)
*A soft plastic cardboard made with super soft super flexible PVC.
+Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Excellent for cutting:
• Plastic
• Acrylic stone
• Aluminum
• Acrylonitrile-butadiene-styrene (ABS)
• Carbon fiber reinforced polymer (CFRP)
• Composite
• Corian
• Coroplast*
• Fiberglass
• Fiberglass PCB board
• HDPE
• High impact polystyrene (HIPS)
• Low density polyethylene (LDPE)
• Phenolics
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate (Lexan™)+
• Polyethylene terephthalate glycol-modified (PETG / PET-G)
• Thermoplastic polyolefin (TPO)
*A soft plastic cardboard made with super soft super flexible PVC.
+Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/4" |
| Application | |
| Material | Solid Carbide |
| Product Type | Spiral Router Bit |
| Length | 2-1/2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |
Item # AN46094-K
•Mfr # 46094-K
$46.79
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Amana Tool's modern materials finishing geometry (MMFG) incorporates high shear multi-flute and a Spektra coating designed for the ultimate combination of finish and tool longevity in aerospace materials. Modern-day materials present challenges to the fabricator using these special multi-flute edge tools featuring Spektra coating addresses these challenges with a winning geometry combination. 3/4" of cutting height
Excellent for cutting:
• Plastic
• Acrylic stone
• Aluminum
• Acrylonitrile-butadiene-styrene (ABS)
• Carbon fiber reinforced polymer (CFRP)
• Composite
• Corian
• Coroplast*
• Fiberglass
• Fiberglass PCB board
• HDPE
• High impact polystyrene (HIPS)
• Low density polyethylene (LDPE)
• Phenolics
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate (Lexan™)+
• Polyethylene terephthalate glycol-modified (PETG / PET-G)
• Thermoplastic polyolefin (TPO)
*A soft plastic cardboard made with super soft super flexible PVC.
+Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Excellent for cutting:
• Plastic
• Acrylic stone
• Aluminum
• Acrylonitrile-butadiene-styrene (ABS)
• Carbon fiber reinforced polymer (CFRP)
• Composite
• Corian
• Coroplast*
• Fiberglass
• Fiberglass PCB board
• HDPE
• High impact polystyrene (HIPS)
• Low density polyethylene (LDPE)
• Phenolics
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate (Lexan™)+
• Polyethylene terephthalate glycol-modified (PETG / PET-G)
• Thermoplastic polyolefin (TPO)
*A soft plastic cardboard made with super soft super flexible PVC.
+Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/4" |
| Application | |
| Material | Solid Carbide |
| Product Type | Spiral Router Bit |
| Length | 2-1/2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |