Pura Vita Real Wood Veneer Panel for Rift-Grain Architectural Casework
The SALT International Pura Vita PVQS06 is a prefinished real wood veneer panel in the Quercia Spazzolato decor, finished as Natural Rift Cut Light Oak Wire Brush. It ships in a 49-inch by 120-inch sheet at 19 mm thick, graded A-Grade Front with B-Grade Back, and is ready to cut and install without any additional coating or finishing step in the shop.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- Protective peel coat — transparent over the A face, blue transparent over the B face, so the two are told apart before it comes off.
- Random or plank match — the veneer layup technique, which decides how the grain repeats across the sheet.
- Real wood face — the show surface is genuine oak veneer, not a printed or filmed substitute, so grain and tone are natural.
- Rift cut grain — sliced at an angle to the growth rings for a tight, straight, linear grain free of cathedral figures and ray fleck.
- Wire brushed texture — the soft early wood is opened by brushing, producing a pronounced pore structure that reads clearly by touch and under raking light.
- A-Grade Front / B-Grade Back construction — the A-grade face is the show side; the B-grade back is real wood held to a looser appearance standard, not a paper or foil backer.
- Prefinished panel — arrives ready to install, eliminating an on-site or in-shop finishing operation.
- Matching ABS edgebanding available — a color-matched edge band exists for this decor, so cut edges can be closed in the same material.
Where This Panel Performs
A rift cut grain is the go-to choice whenever a run of tall doors or a wall of panels needs to read as consistent and linear rather than figured. The straight grain lines repeat sheet to sheet without the mirrored symmetry of a book match or the busy variation of a flat-sawn cathedral, which makes it a natural fit for contemporary kitchen and bath cabinetry, commercial millwork, and high-end closet systems. The wire brushed surface adds tactile depth that a smooth veneer face cannot offer, and because the pore is physically open rather than printed, it holds up to scrutiny under directional lighting. At 49 inches by 120 inches, the sheet size covers full-height components in a single piece on most residential and light commercial job sizes.
Construction and Finish
The face is genuine oak veneer, rift cut for linear grain and wire brushed to open the pore. That combination — a specific slicing method and a specific surface treatment — produces the Natural Rift Cut Light Oak Wire Brush finish the vendor designates for color code PVQS06. Because the panel is prefinished at the factory, the UV-cured or lacquered protective layer is already in place when the sheet arrives; the shop operation starts at the saw, not the finishing booth. The A-grade front is graded for appearance to the tighter standard; the B-grade back is the same real wood material graded more loosely, which means an open shelf or a glass-door cabinet with a visible back face still presents wood rather than a manufactured backer. Matching ABS edgebanding lets the cut edge carry the same decor through to the finished component.
Right Fit by Project and Trade
Cabinet shops running contemporary European-style work will find the rift cut grain pairs cleanly with handleless door profiles and linear hardware. Architects and designers specifying natural materials for commercial interiors can call out PVQS06 by color code and receive a consistent, documented finish. Installers and contractors benefit from the prefinished surface arriving ready to go — no coordination with a finisher, no drying time holding up the schedule. For homeowners and designers working on a renovation, this panel brings the warmth and authenticity of real oak into a space without the field-finishing complexity of site-applied veneer work.
Is this a real wood veneer or a printed wood-look surface?
The face is genuine oak veneer — sliced from actual timber. The grain, tone, and texture are natural, not printed or filmed. Natural variation from sheet to sheet is expected and inherent to the material.
What does the B-grade back look like, and can it show?
The B-grade back is real wood veneer held to a looser appearance standard than the A-grade face. It is the same material, not a paper or foil substitute. It can face inward in a closed cabinet box without issue; for applications where both faces are fully visible, specify the A/A grade instead.
Does matching edgebanding exist for this color?
Yes. Matching ABS edgebanding is available for Pura Vita colors including PVQS06, so cut edges can be closed in the same decor as the panel face.
Does the panel arrive finished, or does it need a topcoat in the shop?
It arrives prefinished. The factory-applied finish is already cured when the sheet ships, so the panel goes from delivery directly to cutting and installation with no additional coating step required.
Is matching HPL available to carry this color onto a countertop?
Matching high-pressure laminate is not part of the Pura Vita program. Plan countertop and high-wear horizontal surfaces with a compatible solid color or a separate HPL selection.
A Natural Oak Surface That Arrives Ready to Install
Pura Vita PVQS06 delivers a genuine rift cut oak face with a wire brushed pore in a prefinished, job-ready sheet — bringing the character of real wood to a cabinet or wall application without the finishing overhead that site-applied veneer work demands.
