1/4" x 57mm Brad Point Boring Bit, Left Hand, 10mm Shank
Item # AN301007
•Mfr # 301007
$22.30
/Each
Rotation: Left Hand
Min Order: 1
Qty mult. by: 1
Product Details
Amana Toolr dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.
Amana's coating is applied onto the bit at a temperature of 570˚ F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Amana's coating is applied onto the bit at a temperature of 570˚ F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Application | |
| Cutting Diameter | 1/4" |
| Length | 57mm |
| Material | Carbide Tipped |
| Product Type | Brad Point Boring Bit |
| Screw Size | |
| Shank Diameter | 10mm |
| Rotation | Left Hand |
Item # AN301007
•Mfr # 301007
$22.30
/Each
Rotation: Left Hand
Min Order: 1
Qty mult. by: 1
Product Details
Amana Toolr dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.
Amana's coating is applied onto the bit at a temperature of 570˚ F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Amana's coating is applied onto the bit at a temperature of 570˚ F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Application | |
| Cutting Diameter | 1/4" |
| Length | 57mm |
| Material | Carbide Tipped |
| Product Type | Brad Point Boring Bit |
| Screw Size | |
| Shank Diameter | 10mm |
| Rotation | Left Hand |