1/2" x 3-5/32" Patternmakers Plunge Router Bit, 2-Flute, 1/2" Shank
Item # AN42420
•Mfr # 42420
$43.66
/Each
Min Order: 1
Qty mult. by: 1
Product Details
This slightly tapered bit is specifically designed for wood patternmaking, especially wood vacuum-forming molds where draft (3?, 5? and 7? taper) is required for releasing the styrene or other plastic from the mold. It can be used to bevel the leading edge on a door.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Patternmakers Plunge Router Bit |
| Length | 3-5/32" |
| Degree of Cut | 3° |
| Shank Diameter | 1/2" |
Item # AN42420
•Mfr # 42420
$43.66
/Each
Min Order: 1
Qty mult. by: 1
Product Details
This slightly tapered bit is specifically designed for wood patternmaking, especially wood vacuum-forming molds where draft (3?, 5? and 7? taper) is required for releasing the styrene or other plastic from the mold. It can be used to bevel the leading edge on a door.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Patternmakers Plunge Router Bit |
| Length | 3-5/32" |
| Degree of Cut | 3° |
| Shank Diameter | 1/2" |