1-3/8" x 3-1/16" V-Joint Router Bit, 1/2" Shank
Item # AN45790
•Mfr # 45790
$84.22
/Each
Product Details
The principal benefit of this glue-joint bit is that the glue seam is far less evident on the bevels of raised panels. Equally important, setup is fast. Cut one half of each joint with the bit at any height. Simply raise or lower the bit 3/32" before cutting the mates. As with all glue-joint bits, the cutter profile expands the edge-to-edge glue surface, but more importantly, produces the precise surface alignment that's essential for fast glue ups. For best results use in a router table.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1-3/8" |
| Application | |
| Material | Carbide Tipped |
| Product Type | V-Joint Router Bit |
| Length | 3-1/16" |
| Degree of Cut | 80° |
| Shank Diameter | 1/2" |
Item # AN45790
•Mfr # 45790
$84.22
/Each
Product Details
The principal benefit of this glue-joint bit is that the glue seam is far less evident on the bevels of raised panels. Equally important, setup is fast. Cut one half of each joint with the bit at any height. Simply raise or lower the bit 3/32" before cutting the mates. As with all glue-joint bits, the cutter profile expands the edge-to-edge glue surface, but more importantly, produces the precise surface alignment that's essential for fast glue ups. For best results use in a router table.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1-3/8" |
| Application | |
| Material | Carbide Tipped |
| Product Type | V-Joint Router Bit |
| Length | 3-1/16" |
| Degree of Cut | 80° |
| Shank Diameter | 1/2" |