1-3/8" x 3" Finger Joint Router Bit, 2-Flute, 1/2" Shank
Item # AN45796
•Mfr # 45796
$89.82
/Each
Product Details
Cut interlocking fingers for strong end-to-end or edge-to-edge glue up with this simple bit. Setup is fast. Center the cut profile on the stock, then cut, alternating the orientation of the show face-up when cutting one workpiece, down when cutting its mate. Use in all CNC and table-mounted routers. For best results use in a router table.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1-3/8" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Finger Joint Router Bit |
| Length | 3" |
| Degree of Cut | 14° |
| Shank Diameter | 1/2" |
Item # AN45796
•Mfr # 45796
$89.82
/Each
Product Details
Cut interlocking fingers for strong end-to-end or edge-to-edge glue up with this simple bit. Setup is fast. Center the cut profile on the stock, then cut, alternating the orientation of the show face-up when cutting one workpiece, down when cutting its mate. Use in all CNC and table-mounted routers. For best results use in a router table.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1-3/8" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Finger Joint Router Bit |
| Length | 3" |
| Degree of Cut | 14° |
| Shank Diameter | 1/2" |