12mm x 76mm Spektra Mortise Compression Spiral Bit, 2-Flute, 12mm Shank
Item # AN46027-K
•Mfr # 46027-K
$141.12
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
These tools have a much shorter up-cut section than the standard compression tools. They are ideal for mortising grooving and dado. 25mm of cutting height
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Excellent for cutting:
• MDF/HDF
• Laminate
• Laminated plywood
• Melamine
• Particle board
• Softwood/hardwood
• Veneered plywood
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Excellent for cutting:
• MDF/HDF
• Laminate
• Laminated plywood
• Melamine
• Particle board
• Softwood/hardwood
• Veneered plywood
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 12mm |
| Application | |
| Material | Solid Carbide |
| Product Type | Compression Spiral Bit |
| Length | 76mm |
| Degree of Cut | |
| Shank Diameter | 12mm |
Item # AN46027-K
•Mfr # 46027-K
$141.12
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
These tools have a much shorter up-cut section than the standard compression tools. They are ideal for mortising grooving and dado. 25mm of cutting height
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Excellent for cutting:
• MDF/HDF
• Laminate
• Laminated plywood
• Melamine
• Particle board
• Softwood/hardwood
• Veneered plywood
Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.
Excellent for cutting:
• MDF/HDF
• Laminate
• Laminated plywood
• Melamine
• Particle board
• Softwood/hardwood
• Veneered plywood
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 12mm |
| Application | |
| Material | Solid Carbide |
| Product Type | Compression Spiral Bit |
| Length | 76mm |
| Degree of Cut | |
| Shank Diameter | 12mm |