1/4" x 2" Coarse Point Diamond Pattern Composite Cutting End Mill Bit, 1/4" Shank
Item # AN46112
•Mfr # 46112
$29.77
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
This bit is designed especially for cutting fiberglass, fiberglass PCB board, composites, phenolic and other highly abrasive materials. Works well on epoxies made with carbon, glass and composite materials. The up-cut/down-cut diamond pattern cutting edges effectively grinds through the material evenly in all directions. 28,000 RPM maximum, 3/4" of cutting height.
Excellent for Cutting:
• Composites
• Fiberglass
• Fiberglass PCB Board
• Fiber Reinforced Plastic (FRP)
• Glass Fiber Reinforced Polymer - Plastic Materials (GFR)
• Glass Reinforced Plastic (GRP)
• G10
• G11
• Phenolic
• Phenolic "Garolite" G-7
Excellent for Cutting:
• Composites
• Fiberglass
• Fiberglass PCB Board
• Fiber Reinforced Plastic (FRP)
• Glass Fiber Reinforced Polymer - Plastic Materials (GFR)
• Glass Reinforced Plastic (GRP)
• G10
• G11
• Phenolic
• Phenolic "Garolite" G-7
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1/4" |
| Application | |
| Material | |
| Product Type | End Mill Bit |
| Length | 2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |
Item # AN46112
•Mfr # 46112
$29.77
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
This bit is designed especially for cutting fiberglass, fiberglass PCB board, composites, phenolic and other highly abrasive materials. Works well on epoxies made with carbon, glass and composite materials. The up-cut/down-cut diamond pattern cutting edges effectively grinds through the material evenly in all directions. 28,000 RPM maximum, 3/4" of cutting height.
Excellent for Cutting:
• Composites
• Fiberglass
• Fiberglass PCB Board
• Fiber Reinforced Plastic (FRP)
• Glass Fiber Reinforced Polymer - Plastic Materials (GFR)
• Glass Reinforced Plastic (GRP)
• G10
• G11
• Phenolic
• Phenolic "Garolite" G-7
Excellent for Cutting:
• Composites
• Fiberglass
• Fiberglass PCB Board
• Fiber Reinforced Plastic (FRP)
• Glass Fiber Reinforced Polymer - Plastic Materials (GFR)
• Glass Reinforced Plastic (GRP)
• G10
• G11
• Phenolic
• Phenolic "Garolite" G-7
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1/4" |
| Application | |
| Material | |
| Product Type | End Mill Bit |
| Length | 2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |