Karran GR-6009 Stainless Steel Bottom Grid, 28.25 × 14.25 in – Fits QT-712 & QU-712

A Tailor-Made Shield for Your Karran Sink

If you own Karran’s spacious QT-712 or QU-712 quartz sink, the GR-6009 bottom grid is the custom-fit armor that keeps your basin looking showroom-new. Built from food-grade T304 stainless steel, it creates a raised platform that deflects pots, pans, and cutlery, so scratches, scuffs, and chips never reach your sink’s surface. Rubber feet and side bumpers lock the rack in place, letting water flow freely to the rear-center drain and making everyday cleanup faster for busy home cooks and professional prep stations alike.

Designed to Fit

Many aftermarket racks claim “universal” sizing. In practice, that means rounded corners that sit awkwardly, creating food-trap gaps. The GR-6009 follows the exact radius of QT-712/QU-712 corners for a flush perimeter seal. Where bargain racks use thinner 201 steel, Karran’s 304 alloy offers higher nickel content for superior anti-corrosion performance critical if you soak cast-iron cookware or use citrus-based cleaners

QU-712 Bisque | QU-712 Concrete | QU-712 Black | QU-712 Brown | QU-712 Gray | QU-712 White

How GR-6009 Simplifies Daily Dish Duty

• Exact Fit for QT-712 & QU-712 sinks – The 28.25 inch × 14.25 in frame follows the inside curves of both models, eliminating guesswork when you drop it in.
• T304 Stainless Steel Construction – 18/10 grade steel resists rust, corrosion, and household acids far longer than lower-grade alloys.
• Protective Rubber Feet & Bumpers – Soft, non-marring guards stop metal-on-quartz contact and keep the grid from sliding while you scrub.
• Elevated Drainage Design – The 1 inch lift lets water, crumbs, and detergent flow unimpeded to the rear-center drain, reducing standing water and soap film.
• Lightweight yet Sturdy – At roughly 3 lb, it is easy to lift out for cleaning yet strong enough to support heavy Dutch ovens.
• One-Year Limited Warranty – Karran backs the grid against defects in materials and craftsmanship for 12 months.

Confidence that Lasts: Karran’s One-Year Protection Plan

Karran warrants the GR-6009 against manufacturing defects for 1 year from the original purchase date. If welds fail or steel shows premature corrosion under normal residential use, contact Karran with proof of purchase for repair or replacement. Normal wear, such as minor surface scratches, is considered part of regular use and not covered.

What Customers Say About the GR-6009

Shoppers consistently praise the grid’s snug fit, durable feel, and rubber feet that don’t discolor quartz bowls. Many mention that dishes dry faster because water drains freely, and several note reduced glassware breakage when rinsing.

Questions About the GR-6009? We’ve Got Answers

Will this rack fit other Karran models?
It is engineered specifically for QT-712 and QU-712. For other sinks, use Karran’s model-specific grid to ensure a proper fit.

How do I clean the grid?
Lift it out weekly and wash with mild dish soap and a soft brush. Avoid abrasive pads and bleach; both can dull the stainless finish.

Can I place hot pans straight from the stove on the rack?
Yes. T304 stainless steel handles typical cooking temperatures without warping, though extreme heat above 500 °F may discolor metal over time.

Does the grid sit flat or angled?
Rubber feet raise it evenly about 1 in all around, keeping items level while promoting drainage toward the rear center.

Is hardware required to install it?
No installation hardware is needed. Simply lower the rack into your sink—rubber bumpers keep it stable.

Stainless Steel Safeguard

The Karran GR-6009 bottom grid is the precise, stainless steel safeguard your QT-712 or QU-712 sink deserves. Its T304 construction resists rust, rubber-cushioned feet prevent scratches, and a custom radius guarantees a slip-free fit. Backed by a one-year warranty and praised by homeowners for effortless maintenance, GR-6009 keeps your sink pristine while streamlining daily dish duty.