Bottom Grid Built for the Large Bowl of the QT-610 and QU-610
The Karran GR-6010 is a stainless steel bottom grid sized and shaped specifically for the large bowl of the Karran QT-610 top mount and QU-610 undermount sinks. It sits on the bowl floor to keep dishes, cookware, and produce off the sink surface while water drains freely beneath.
Key Features
• Model-specific fit — designed to match the exact interior dimensions of the QT-610 and QU-610 large bowl, so it sits flush without shifting.
• Stainless steel construction — a durable, corrosion-resistant material well suited for constant wet-environment use at the sink.
• Elevated platform design — lifts items off the bowl floor so water drains beneath, reducing contact between standing water and sink surfaces or dishware.
• Open wire pattern — allows rinsing water to pass through freely while items stay stable on the grid surface.
• Sold separately — a dedicated accessory purchase for QT-610 and QU-610 owners, not included with those sinks at point of sale.
Protecting the Bowl Without Getting in the Way
A bottom grid earns its place at a busy sink by doing two things at once: keeping the bowl surface from accumulating fine scratches caused by cookware and utensils sliding across it, and holding items elevated so water drains rather than pools. The GR-6010 handles both in the large bowl of the QT-610 and QU-610, where most of the daily washing work happens. The open wire construction means rinsing runs straight through to the drain without backing up around the grid, and the low-profile frame stays out of the way when the bowl is being loaded or cleared.
Stainless Steel in a Wet Environment
Stainless steel is a practical choice for a grid that lives at the bottom of a sink full time. It holds up to soap, food acids, and constant moisture without the surface degradation that affects coated or plated alternatives over time. The GR-6010's wire construction also avoids the flat surfaces where water can collect and sit, keeping the grid itself from holding moisture between uses. For QT-610 and QU-610 owners who use their sink heavily day to day, stainless is the right material for a long-service accessory.
The Right Buyer for This Grid
The GR-6010 is a straightforward match for anyone who already owns a QT-610 or QU-610 sink and wants to add bowl protection after installation. It is equally relevant for cabinet shops and designers specifying a complete sink setup from the start — pairing the grid with the sink order avoids a follow-up purchase once the countertop is in. The large-bowl designation is important here: the QT-610 and QU-610 are two-bowl sinks, and each bowl takes its own grid. The GR-6010 covers the large bowl only.
Does the GR-6010 fit both the top mount QT-610 and the undermount QU-610?
Yes. The GR-6010 is published as compatible with the large bowl of both the QT-610 top mount and the QU-610 undermount sinks. The bowl interior dimensions are the same across both mount styles in the 610 model.
Is this grid included when I purchase the QT-610 or QU-610 sink?
No. The GR-6010 is sold separately as a standalone accessory. If the sink was purchased as a -PK1 bundle, verify the contents of that specific pack, but the bare sink models do not include a grid.
Will this grid fit the small bowl of the QT-610 or QU-610?
No. The GR-6010 is sized for the large bowl only. The small bowl of the QT-610 and QU-610 requires its own separate grid sized to those interior dimensions.
Can I use this grid in a different Karran sink model?
The GR-6010 is listed for the QT-610 and QU-610 large bowl. Fit with other Karran models is not established by the published compatibility data, and bowl dimensions vary across the line.
A Grid That Stays in Step with the Sink
When the fit is exact and the material is right for the environment, a bottom grid becomes part of how the sink works rather than an afterthought sitting loose at the bottom. The GR-6010 is built to that standard for the QT-610 and QU-610 large bowl.
