49/64" x 3-1/2" Overhang Trim Bit with Ball Bearing, 2-Flute, 1/2" Shank
Item # AN57155
•Mfr # 57155
$69.89
/Each
Min Order: 1
Qty mult. by: 1
Product Details
This bit is designed specifically for use for the Karran stainless steel edge sinks for laminate and 1/2" solid surface materials. They trim the counter-top edge after the bowl is mounted. Trim a sink cutout flush with the bowl in stages using these "over-hang"O and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide? bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 49/64" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Overhang Trim Bit |
| Length | 3-1/2" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Item # AN57155
•Mfr # 57155
$69.89
/Each
Min Order: 1
Qty mult. by: 1
Product Details
This bit is designed specifically for use for the Karran stainless steel edge sinks for laminate and 1/2" solid surface materials. They trim the counter-top edge after the bowl is mounted. Trim a sink cutout flush with the bowl in stages using these "over-hang"O and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide? bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 49/64" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Overhang Trim Bit |
| Length | 3-1/2" |
| Degree of Cut | |
| Shank Diameter | 1/2" |