3/4" x 3-1/4" Sink/Trim Bit with Ultra-Glide Ball Bearing Guide Solid Surface, 2-Flute, 1/2" Shank
Item # AN57153
•Mfr # 57153
$52.40
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Trim a sink cutout flush with the bowl in stages using these "over-hang"O and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation. 1" of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Sink/Trim Bit |
| Length | 3-1/4" |
| Degree of Cut | 10° |
| Shank Diameter | 1/2" |
Item # AN57153
•Mfr # 57153
$52.40
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Trim a sink cutout flush with the bowl in stages using these "over-hang"O and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation. 1" of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Sink/Trim Bit |
| Length | 3-1/4" |
| Degree of Cut | 10° |
| Shank Diameter | 1/2" |