Sand Oak Texture, Both Faces Ready
The Saviola A/A decorative panel in Pecan Scuro brings a warm, Sand Oak finish to both faces of a 19 mm sheet, so every component comes off the saw ready to show. Built on a hardwood particleboard core and sized at 83-5/16 inch by 110-1/4 inch, this A/A panel suits cabinet boxes, open shelving, and any millwork where the back face is as visible as the front.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade construction means both faces carry the same decorative finish, with no back-of-panel compromise.
- Sand Oak finish in the Pecan Scuro decor delivers a warm, wood-grain character with the texture and tone of the Sand Oak surface program.
- 19 mm hardwood particleboard core holds fasteners cleanly and stays flat across the full sheet run.
- 83-5/16 inch by 110-1/4 inch nominal sheet yields 63.79 square feet per sheet, sized for full-height cabinet and closet components.
- CARB2 compliant core clears the formaldehyde emission requirement on commercial and residential specifications.
- Matching ABS edgebanding available in this color, so cut edges close without a visible color break.
Where an A/A Panel Earns Its Place
An A/A panel is the right choice whenever both faces of a component can be seen. Open-face cabinet boxes, room dividers, freestanding shelving units, and furniture-grade carcases all expose the back panel at some point, whether during installation or in the finished piece. Specifying an A/A panel from the start means the back of the box reads the same as the front without a second operation, a paint step, or a visible grade difference at the edge. On a large run, that consistency adds up faster than the sheet price difference suggests.
The 83-5/16 by 110-1/4 inch sheet size is also worth noting for layout planning. At 63.79 square feet per sheet, it cuts efficiently for tall cabinet carcases and full-height closet panels, and the fractional dimensions are set by the manufacturer to nest standard part sizes with minimal waste. Round numbers do not come off this saw the same way.
Construction and Surface Detail
The decorative face is thermally fused laminate, the surface technology where a resin-impregnated paper is fused directly to the board under heat and pressure. There is no separate sheet and no glue line to open at the edge. The Pecan Scuro decor runs in the Sand Oak finish family, which is a textured, low-sheen surface with a wood pore structure that reads naturally under both direct and raking light. Both faces of this A/A panel carry that finish, so the surface character is consistent regardless of which face is outward.
The hardwood particleboard core is CARB2 compliant. It machines cleanly on a standard cabinet saw and takes confirmat and cam-and-dowel hardware without predrilling for a steel insert. Weight and density are typical of industrial particleboard at this thickness, which is relevant when estimating load for a tall open unit.
Who Reaches for This Panel
Cabinet shops running production carcases in a warm wood palette reach for this panel when open shelving or an A/A application is in the cut list. Interior designers specifying a cohesive warm-tone finish for a closet or entertainment wall find that an A/A panel eliminates the field decision about which face goes where. Contractors assembling furniture-grade built-ins on site appreciate not having to plan face orientation before the parts are cut. This is a professional-volume sheet sold by the panel, and it fits naturally into any shop that already edgebands its own panels.
Note that Pecan Scuro is currently stocked in the Sand Oak finish. Incoming inventory will transition to the Artwood finish plate, so confirm the finish in stock before specifying into a reorder-sensitive job.
Frequently Asked Questions
What does A/A mean on a Saviola panel?
A/A indicates that both faces of the panel carry the same decorative finish to the same appearance grade. Either face can be the show face, which is what separates it from an A/B panel where the back is a plain balancing backer.
Is matching edgebanding available for Pecan Scuro?
Yes. Matching ABS edgebanding is available for this color in the Saviola collection. ABS is chlorine-free and holds a color match closely enough that a banded edge reads as part of the face rather than a separate component.
The sheet size is fractional. Is that normal?
Yes, and it matters for layout. The 83-5/16 by 110-1/4 inch dimensions are set by the manufacturer to nest specific part sizes efficiently. Rounding to 84 by 110 for estimating purposes will produce a yield error that compounds across a full order.
What finish is currently in stock on Pecan Scuro?
Current stock ships in the Sand Oak finish. Pecan Scuro is mid-transition to the Artwood finish plate on new inventory. If finish consistency across a job matters, confirm which finish is on hand before placing the order.
Is matching HPL available for Saviola colors?
Yes. Saviola HPL is stocked in two sheet sizes, 73 inch by 120 inch and 60 inch by 120 inch, so shops that cannot handle the wider sheet have an option. Confirm the color match against the current stocking list before ordering for a countertop or horizontal surface application.
A Panel That Works Both Ways
When the design calls for a component that looks finished from every angle, an A/A panel in Pecan Scuro removes the guesswork at the saw and delivers a consistent warm-wood result on every face that comes off the sheet.
