Short-Run ABS Edgebanding for Thick-Edge Panel Work in Bianco
This is the SALT Saviola matching ABS edgebanding in color GS68R Bianco, 43 mm wide, 1 mm thick, and supplied on a 54-foot roll. At 43 mm, this band is sized for 1-1/4 inch to 1-1/2 inch (approximately 30 to 38 mm) substrate thicknesses, and the short roll is the right choice when one job or a single cabinet run is all that is needed in this color.
Key Features
- Saviola color match in GS68R Bianco: manufactured to coordinate with the Saviola TFL panel in this decor, so face and edge read as one surface.
- 43 mm width: trims flush on thicker substrates and accommodates a small overhang for clean edge trimming on both faces.
- 1 mm ABS construction: chlorine-free polymer that holds color and stays dimensionally stable through machining and daily handling.
- 54-foot short roll: sized for a small shop or a single-project run without committing to a full 328-foot production roll.
- Vetta finish: the surface texture corresponds to the Vetta finish family in the Saviola collection, maintaining a consistent look at the edge.
Where the 43 mm Width and Short Roll Fit the Job
The 43 mm band is the practical choice when the substrate runs thicker than a standard 19 mm panel. A vanity carcass built from doubled-up stock, a commercial countertop support rail, or a thick decorative shelf are the kinds of components that call for extra banding width. The 54-foot roll matches the scale of those jobs: enough footage to complete the run, without a surplus roll sitting on the shelf after the project ships. For a kitchen where most of the run is standard-thickness panels and only a handful of components need this wider band, the short roll keeps inventory lean.
ABS Material and Vetta Surface
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer that clears specifications where PVC is excluded. The material takes an edgebander well, bonds cleanly, and scrapes or trims without chipping at the corners. At 1 mm, the band is substantial enough to handle light impact on a finished edge. The Vetta finish coordinates the banding surface with the Saviola panel face in this color family, so the transition from face to edge does not introduce a gloss or texture break. Bianco is a clean white decor, and white edges are among the most scrutinized joints in a finished interior — the matched finish eliminates the mismatch that a generic white band would introduce.
Who Orders This Roll
Cabinet shops running Saviola panels in GS68R Bianco and building components thicker than a single 19 mm sheet are the natural buyer. Designers specifying a white TFL interior with a consistent edge detail will want the matched band rather than a close-but-not-quite substitute. Custom millwork shops handling commercial fixture work in white — display cases, reception counters, library shelving — often encounter this width requirement and want the finish to carry through to the edge. The 54-foot roll also suits a shop that stocks the 328-foot roll in 23 mm for the bulk of its work and orders the 43 mm short roll as a specialty depth for occasional thicker components.
Does this banding come pre-glued?
No. This roll is unglued and applied with an edgebander using a standard hot-melt adhesive. It is not an iron-on product.
Is a 328-foot production roll available in GS68R Bianco at 43 mm?
The Saviola edgebanding program supplies the 43 mm and 65 mm widths in both 54-foot and 328-foot rolls. If your volume warrants the long roll, that SKU is available separately.
What panel thickness does 43 mm banding suit?
The 43 mm width is generally used on substrates from about 30 mm to 38 mm thick, where the band needs enough overhang on both faces to trim flush cleanly. For a standard 19 mm panel, the 23 mm width is the right fit.
Why choose ABS over PVC for this application?
ABS is chlorine-free, which satisfies specifications that exclude PVC. In performance the two are comparable for indoor cabinet work, but ABS is increasingly specified on commercial and institutional projects where halogen-free materials are required.
The Right Edge Finish for Bianco Panel Work
Matched edgebanding turns a cut panel edge into an extension of the face rather than an exposed seam. In a clean white decor like GS68R Bianco, that match is visible from across the room, and the Vetta finish coordination makes it hold up under close inspection too.
