Calicot-Finish ABS Edgebanding For Wide-Edge and Thick-Panel Work
This is the Saviola-matched ABS edgebanding for the GS20M Buff Linen color, supplied in a 65 mm width to close the exposed edge on thicker panels and wide-stile components where a narrower band would fall short of covering the core. The 54-foot roll is sized for focused runs, making it a practical choice for a single project or a small batch of matching parts without locking up a production-length supply of one color.
Key Features
- Calicot surface finish matches the tactile character of the GS20M Buff Linen panel face so edge and face read as one surface.
- 65 mm width provides the overhang needed to trim flush on panels thicker than what a 23 mm band covers, including stacked or post-formed components.
- 54-foot roll is purpose-sized for single-job or short-run use without the commitment of a full production coil.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and compatible with automated edgebanders as well as manual application.
- Saviola collection match ties the banding directly to the GS20M panel program so color and texture alignment is built in, not approximated.
Where This Width Earns Its Place
A 65 mm band covers edge situations that narrower widths cannot. It is the right choice when the panel stack runs deeper than standard cabinet-box thickness, when a profiled or post-formed edge requires extra material before trimming, or when a wide stile or a structural component built from glued-up boards needs the edge finished flush on all faces. Closet system designers specifying tall panels, furniture makers building thick slab doors, and millwork shops handling architectural components will all reach for the 65 mm width where the 23 mm roll would leave core exposed after trimming.
Material and Finish Details
ABS polymer is the standard choice for edgebanding in European decorative panel programs because it is chlorine-free, which clears specifications that exclude PVC, and because it holds a printed decor and surface texture with the color fidelity and dimensional stability that close color matching requires. The Calicot finish on this roll replicates the specific texture of the Buff Linen panel face. Buff Linen reads as a warm, lightly textured neutral, and the Calicot texture gives the edge the same matte, linen-like surface character rather than a flat or glossy contrast band. The 1 mm wall thickness is standard for production edgebanding machinery and is stiff enough to survive handling and transport without crease damage.
Who Orders This Roll
Cabinet shops running GS20M Buff Linen panels in thick-panel or wide-component applications reach for this roll when the 23 mm banding width is not enough. Kitchen and bath installers building out a vanity or closet tower with structural-depth side panels need the wider band to clear the full edge without a visible core strip. Architects and designers who specify Buff Linen for commercial millwork and want documented color coordination across face and edge will also find this the correct companion to the Saviola panel. The 54-foot roll length suits shops that are not running this color daily but need the right match available when a job calls for it.
Will this banding work on a standard edgebander, or does the 65 mm width require a specialized machine?
Most production edgebanders accept rolls up to 65 mm and wider without modification. The 1 mm thickness is standard. Check your machine's banding-width specification if you are running a compact or entry-level unit, as throat width limits vary by model.
Is this the only width available for GS20M Buff Linen, or are narrower rolls stocked as well?
Saviola matching edgebanding is available in 23 mm and 43 mm widths in addition to this 65 mm roll. Match the width to your panel thickness: 23 mm for standard 19 mm cabinet-box panels, 43 mm for mid-depth components, and 65 mm for thick panels and wide stiles.
Does the Calicot finish on the banding hold up the same way the panel face does under light and handling?
The Calicot texture is produced in the same matte, linen-character finish on both the panel and the edgebanding, so the edge does not stand out as shinier or flatter than the face under normal lighting. Like any matte panel edge, it will show wear faster than a high-gloss surface in high-contact zones, so plan for that in commercial or high-traffic applications.
The product is listed under PVC Edgebanding in the site category. Is this banding actually ABS or PVC?
This banding is ABS, not PVC. The product name, part number, and material construction all confirm ABS. ABS is chlorine-free and is the correct material for specifications that exclude PVC.
The Right Edge for a Finished Result
Leaving a panel edge unfinished, or finishing it with a banding that mismatches the face texture, is the detail that separates a professional installation from one that looks assembled. This 65 mm Buff Linen roll in the Calicot finish gives the wider edges in a Saviola GS20M job the same surface the face delivers, so the completed component reads as one material from every angle.
