Calicot Finish Decorative Panel for A/A Casework
The Saviola GSX7R Anthracite Linen panel is a 19 mm A/A thermally fused laminate (TFL) decorative panel finished on both faces in Calicot, a structured surface texture from the SALT International Saviola collection. At 83-5/16 inches by 110-1/4 inches, this sheet is sized for full-height cabinetry, closet systems, and commercial millwork where both faces of a component are visible.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade pair — both faces carry the same Anthracite Linen decor, so either side can face out without a second operation.
- Calicot surface texture — a structured, tactile emboss that adds depth to a neutral-toned dark panel.
- 19 mm thickness — pairs with standard 23 mm edgebanding and accepts confirmat and cam hardware without modification.
- 83-5/16 inch by 110-1/4 inch sheet — sized to nest full-height closet and cabinet parts with efficient yield from a single sheet.
- TFL construction — the decorative face is fused directly to the core under heat and pressure, leaving no glue line at the edge.
- Matching ABS edgebanding available — coordinates the cut edge to the panel face in the same Anthracite Linen decor.
Where This Panel Fits in a Project
Anthracite Linen is a dark, warm-neutral color with enough visual weight to anchor a room without reading as black. The Calicot texture softens the surface under raking light, making it a practical choice for large horizontal runs — open shelving, bed surrounds, and office credenzas — where a flat panel face would show every irregularity. Because both faces are finished to the A-grade standard, the sheet works equally well in a room divider, a free-standing wardrobe, or an island where the interior and exterior are both in view. The sheet size supports full-height applications without a horizontal seam: a standard 96-inch floor-to-ceiling cabinet leaves material for smaller parts, and a 110-1/4-inch sheet reaches common nine-foot ceiling heights with room to trim.
Construction and Surface Detail
TFL bonds the decorative paper directly to the core under heat and pressure, so the face is structurally part of the board rather than a film that can lift at a machined edge. The Calicot finish is a registered emboss — the surface relief follows the printed pattern, giving the panel a presence under a light wash that flat matte panels do not achieve. The core is CARB2 compliant hardwood particleboard, which handles a machine-driven fastener cleanly and stays flat across a wide sheet. Matching ABS edgebanding in the Anthracite Linen decor is available to close cut edges, so the panel reads as a solid component from every angle.
Who Orders This Panel
Cabinet shops running contemporary residential kitchens and custom closets reach for this color when the specification calls for a dark, textured neutral that photographs well and holds up in daily use. Commercial fixture builders use it on display cases and retail shelving where two finished faces eliminate the need to orient panels away from sight lines. Designers specifying handleless kitchen programs favor the Calicot surface because the structured texture helps a large flat door front avoid the blank, plastic look that a gloss or smooth matte face can produce. The 83-5/16 by 110-1/4 inch format suits shops equipped to process a sheet over the standard 4 by 8; if your saw table tops out at 96 inches, confirm clearance before ordering.
Frequently Asked Questions
What does A/A mean on this panel?
A/A indicates that both faces are finished to the same primary appearance grade in the Anthracite Linen Calicot decor. Either face can be the show face, which matters when both sides of a component are visible — an open shelf, a room divider, or a cabinet end that turns a corner.
Is matching edgebanding available in this color?
Yes. Matching ABS edgebanding in Anthracite Linen is available for the Saviola collection. ABS is chlorine-free and clears specifications that exclude PVC banding.
What edgebanding width works with a 19 mm panel?
A 23 mm wide band is the standard pairing for a 19 mm panel. It trims flush on both faces with enough overhang to clean up cleanly on an edgebander.
Is matching HPL available for this Saviola color?
Yes. Saviola matching HPL is stocked in both 73 inch by 120 inch and 60 inch by 120 inch sheet sizes. If your shop cannot process the wider sheet, the 60 inch option carries the same color and surface to a countertop or high-wear vertical without the handling challenge.
How many square feet does one sheet cover?
The 83-5/16 inch by 110-1/4 inch sheet yields 63.79 square feet. That figure is the area of the full sheet before cutting — usable yield depends on your cut list.
Can this panel be used in a bathroom or laundry room?
The hardwood particleboard core is suitable for dry interior environments. For vanity cabinets and laundry installations where incidental moisture is a real concern, confirm whether the water-resistant core variant in this collection meets your project requirement before specifying.
A Panel Built to Show Both Faces
When a job demands a dark, textured neutral that works equally hard on every visible surface, the Saviola Anthracite Linen A/A panel in Calicot removes the constraint of panel orientation and delivers a finished result from the saw without a coating step.
