A Clean White Panel Built for A/A Cabinet Work
The Saviola GS68R Bianco decorative panel delivers a crisp white finish on both faces, arriving ready to cut and edge with no additional surface preparation. At 8 mm thick and sized at 83-5/16 inch x 110-1/4 inch, this A/A-grade thermally fused laminate panel is well suited to cabinet boxes, open shelving, and interior components where both faces remain visible after installation.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade construction means both faces carry the same decorative Bianco white surface, so either side can face out.
- Vetta finish provides a lightly textured, low-sheen surface that softens glare on large flat panels.
- 8 mm thickness keeps the sheet lightweight for back panels, cabinet interiors, and vertical dividers where full 19 mm board is unnecessary.
- 83-5/16 inch x 110-1/4 inch sheet size yields 63.79 square feet per sheet, suited to tall cabinet runs and full-height closet components.
- Thermally fused laminate surface is fused directly to the core with no separate adhesive layer, so the edge holds cleanly through the saw and edgebander.
- Matching ABS edgebanding is available in this color, so face and edge read as one continuous surface after banding.
Where This Panel Fits the Work
A white panel that shows well from both sides is the practical choice for cabinet back panels, interior partitions, and open shelving where the underside or reverse face is visible from the room. The 8 mm thickness keeps weight down on tall back panels and reduces the load on shelf pins and dado joints without sacrificing a clean, finished appearance. The generous sheet size also makes this a strong candidate for full-height closet systems, where fewer sheets mean fewer seams across a wide wall.
Surface, Core, and Construction
The Vetta finish is a textured, low-gloss surface that deflects surface scratches and resists showing handling marks in a way that a smooth high-gloss face would not. The thermally fused laminate construction bonds the decorative paper directly to the particleboard core under heat and pressure, eliminating a glue line at the face and producing an edge that machines cleanly on a standard beam saw or panel saw. Both faces are finished to the same A-grade appearance standard, which means a shop can orient the sheet either way without pre-sorting or marking faces before cutting.
Who Specifies This Panel
Cabinet shops building painted-look interiors in white reach for this panel when they want a factory-applied surface that eliminates a spray booth step. Closet system fabricators use the 8 mm sheet for back walls and vertical dividers where the lighter board simplifies handling and hardware loads. Designers specifying a clean, consistent white interior for frameless casework will find the A/A grade and the Vetta texture a practical combination: the surface reads uniformly across a run of doors or drawer fronts, and the low-sheen finish keeps the appearance stable under varying light conditions. Matching ABS edgebanding in GS68R Bianco is available to close the cut edge so the component reads as a single material rather than a faced board.
Frequently Asked Questions
What does A/A grade mean on this panel?
Both faces are finished to the same decorative standard and either face can be the show side. This is different from an A/B panel, where only one face meets the primary appearance grade.
Can I use this panel for cabinet doors at 8 mm?
The 8 mm thickness is best suited to back panels, interior dividers, and secondary components. For doors and drawer fronts, a thicker panel in the same Bianco color and Vetta finish is the more typical choice.
Is matching edgebanding available for GS68R Bianco?
Yes. Matching ABS edgebanding in the Saviola collection is available for this color so the cut edge finishes flush and consistent with the face.
How many square feet does one sheet cover?
At 83-5/16 inch x 110-1/4 inch, each sheet covers 63.79 square feet. Panels are sold by the sheet, so estimate your cut list before ordering to avoid buying more sheets than the job needs.
Is matching high-pressure laminate available for Saviola?
Yes. Saviola HPL is stocked in two sheet sizes, 73 inch x 120 inch and 60 inch x 120 inch, so shops that cannot handle the wider sheet still have an option. Matching HPL lets you carry the Bianco color onto countertops and high-wear horizontal surfaces the panel program does not cover on its own.
A Finished White Surface, Ready to Build With
The Saviola GS68R Bianco A/A panel arrives with both faces finished, both sides ready to show, and a sheet size large enough to minimize seams across a cabinet run — so the shop focuses on cutting and assembly rather than prepping a surface.
