A Thin A/A Panel For Flexible Casework Layouts
The Saviola A/A Decorative Panel in Canyon Oak (GSD17) brings a warm, wood-look TFL face to both sides of an 8 mm sheet, sized at 83-5/16 inch x 110-1/4 inch in the Artwood finish. Because both faces carry the same decorative surface, this panel works wherever a component needs to read cleanly from either direction — open shelving, dividers, door substrates, and interior partitions among them.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/An A/A construction delivers matching Canyon Oak TFL faces on both sides, so neither face needs to be hidden.
- Artwood finish pairs a structured wood-pore texture with the Canyon Oak decor for a tactile, natural character.
- 8 mm thickness keeps the sheet light relative to a full 19 mm panel, making it practical for back panels, dividers, and lightweight components.
- 83-5/16 inch x 110-1/4 inch sheet size — 63.79 square feet per sheet — provides efficient yield for tall or wide cut parts.
- CARB2 compliant hardwood particleboard core meets formaldehyde emission requirements for residential and commercial specifications.
- Matching ABS edgebanding is available in this color to close cut edges in the same Canyon Oak decor.
Where This Panel Fits The Work
At 8 mm, this panel occupies a specific place in a cabinet shop's material list. It is the right call for cabinet backs, drawer bottoms on large runs, shelf dividers, and any component where full-thickness panel weight would be a liability without adding structural value. The A/A construction removes the need to orient the sheet during layout — either face can show, which speeds handling on the saw and simplifies stacking. The Canyon Oak color, with its warm mid-tone and structured Artwood grain, reads well in both contemporary and transitional interiors, and it coordinates naturally with natural wood accents and matte hardware finishes.
Surface, Core, and Construction
The Canyon Oak decor is thermally fused laminate, meaning the decorative paper is fused directly into the board under heat and pressure with no separate adhesive layer. The Artwood finish adds a raised wood-pore texture that registers with the grain print, giving the face depth that a flat matte surface does not carry. The substrate is CARB2 compliant hardwood particleboard, which holds machine-driven fasteners well and stays flat across a wide sheet. At 8 mm, the panel is thinner than structural casework stock — plan edgebanding, joinery, and hardware selection accordingly, and note that this thickness calls for 23 mm banding trimmed down rather than the wider widths used on thicker panels.
Who Orders This Panel
Cabinet shops running high-volume closet and storage programs reach for this panel when they need a consistent, finished back panel or divider without committing to the cost and weight of full-thickness stock. Interior designers working on built-ins and feature walls specify Canyon Oak for its neutral warmth — it is easy to layer with both painted and stained elements. Contractors sourcing for renovation work appreciate the large sheet size, which minimizes seams on tall wall panels and wide cabinet backs. The A/A construction also suits display and retail fixtures where both faces of a divider or shelf are visible to the end user.
Is this panel suitable for a cabinet back that will be seen from inside the cabinet?
Yes. The A/A construction means both faces carry the full Canyon Oak TFL surface, so the inside face of a cabinet back looks finished rather than raw.
Does matching edgebanding exist for GSD17 Canyon Oak?
Yes. Matching ABS edgebanding is available in Canyon Oak to close cut edges in the same color and decor. Order it alongside the panel to keep the edge consistent with the face.
What is the Artwood finish, and how does it differ from a standard matte TFL?
Artwood is a structured surface finish that adds a tactile wood-pore emboss to the panel face. Unlike a flat matte surface, the texture can be felt under the hand and catches raking light in a way that reinforces the wood character of the Canyon Oak print.
Can I use this panel for drawer bottoms?
The 8 mm thickness is appropriate for drawer bottoms in standard residential and commercial cabinetry runs. Confirm the drawer box construction and the load against your shop's standard before committing — heavier-duty applications may call for thicker stock.
Is matching HPL available for the Saviola collection?
Yes. Matching high-pressure laminate is available for Saviola colors in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. Confirm which sheet size your shop can process before ordering.
The Right Panel Moves The Job Forward
Canyon Oak in an A/A, 8 mm sheet is a specific tool for a specific moment in a build — light enough to handle efficiently, finished enough to show on both faces, and large enough to yield tall parts with minimal seams. When the spec calls for it, this panel is ready to cut and install.
