Fantasia Pattern and Full A/A Utility
The Saviola A/A decorative panel in GS40R Fantasia brings a finished face to both sides of the sheet, making it the right call any time a component will be seen from front and back. Built on a 19 mm hardwood particleboard core and surfaced with thermally fused laminate in the Vetta finish, this panel ships at 83-5/16 inch x 110-1/4 inch and covers 63.79 square feet per sheet.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade construction puts the same Fantasia decor on both faces, so either side can show without a second operation.
- Vetta finish delivers a textured, tactile surface character designed to complement wood-tone and decorative decors.
- 19 mm hardwood particleboard core holds fasteners cleanly and stays flat across a wide sheet run.
- 83-5/16 inch x 110-1/4 inch nominal sheet size yields 63.79 square feet per sheet, sized for efficient nesting on full-height casework parts.
- Matching ABS edgebanding available in the same GS40R Fantasia decor, so cut edges read as one continuous surface.
- CARB2 compliant core meets California and federal formaldehyde emission requirements for residential and commercial work.
Where This Panel Earns Its Place
Open shelving, room dividers, and cabinet boxes with visible backs are the clearest fits for an A/A panel. When a component lives between two spaces, both faces need to look finished. A peninsula base, a closet island, a freestanding storage unit, or a display case with a glass door behind it — any of these puts the back face in plain view, and an A/B panel simply will not cover the job. Fantasia's decorative character also makes it a reasonable choice for accent wall panels or retail fixture work where the graphic pattern itself is part of the design intent.
Surface, Core, and What They Mean for the Shop
Thermally fused laminate bonds the decorative paper directly to the board under heat and pressure — there is no separate glue line to open at the edge, and the face arrives ready to cut and band without any additional finishing step. The Vetta finish adds a textured surface that reads well in natural and artificial light and holds up to normal handling in a cabinet environment. The 19 mm particleboard core is the standard cabinet-box thickness: it pairs directly with 23 mm ABS edgebanding, accepts a confirmat or construction screw without predrilling in most cases, and machines cleanly on a panel saw or CNC. Because both faces carry the same TFL surface, the core is fully enclosed once the edges are banded, which helps with long-term dimensional stability in climate-controlled interiors.
Who This Panel Is Built For
Cabinet shops running production boxes with open backs, millwork shops specifying both faces on a floor-to-ceiling unit, and designers who want a consistent decor from front to back will get the most from this sheet. The large nominal size reduces the number of sheets needed to cut a full-height run, and the 63.79 square foot coverage simplifies estimating on bigger jobs. Contractors and installers who need a panel that does not require a separate back-finishing step benefit from the same construction: one sheet, two finished faces, no site coatings.
What does A/A mean on a Saviola panel?
A/A indicates that both faces of the panel carry the same decorative surface to the same appearance grade. Either face can show in the finished piece. This is different from an A/B panel, where one face is the show face and the reverse is a backer held to a looser standard.
Does matching edgebanding exist for GS40R Fantasia?
Yes. Matching ABS edgebanding is available in the Saviola collection for this color, so the cut edge bands to the same Fantasia decor as the face. ABS is chlorine-free, which satisfies specifications that exclude PVC.
Is matching HPL available for this color?
Matching HPL is available in the Saviola collection and ships in two sheet sizes: 73 inch x 120 inch and 60 inch x 120 inch. The 60 inch sheet suits shops that cannot process the wider format.
What is the Vetta finish, and how does it affect machining?
Vetta is a textured TFL finish in the Saviola collection. The texture is on the surface only and does not affect standard panel saw, CNC, or edgebander operation. Machine the panel the same way you would any 19 mm TFL board.
Is this panel suitable for use near moisture?
The core is a standard hardwood particleboard. It performs well in dry, climate-controlled interior environments. For applications with consistent moisture exposure, such as under-sink or bathroom base work, look for a panel with a published water-resistance hour rating.
One Sheet, Two Finished Faces, Ready to Build
The Saviola A/A Fantasia panel in Vetta finish closes the gap between a fast production run and a clean, fully finished result on every visible surface — no back-painting, no secondary cladding, no workaround.
