Full-Sheet A/A Panel For Cabinetry That Shows on Both Sides
The Saviola GSDH1 Rovere Agento A/A decorative panel delivers a finished face on both sides, so open shelving, room dividers, and exposed cabinet boxes present the same oak-tone decor whether viewed from the front or the back. At 83-5/16 inch by 110-1/4 inch and 19 mm thick, this is a production-scale sheet in the Vetta finish family from the Saviola collection by SALT International.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade construction means both faces carry the same decorative standard, leaving no hidden side on a finished component.
- Thermally fused laminate (TFL) surface fuses the decorative face directly to the core with no glue line to open at the edge.
- Vetta finish presents a structured wood-pore texture on the Rovere Agento decor, adding tactile depth to the oak grain pattern.
- 19 mm thickness suits standard confirmat-fastened cabinet construction and pairs with 23 mm edgebanding on a square edge.
- 83-5/16 inch by 110-1/4 inch sheet size gives 63.79 square feet per sheet, sized to nest tall cabinet parts efficiently.
- CARB2 compliant hardwood particleboard core meets formaldehyde emission requirements for commercial and residential specification.
Where This Panel Works
A/A construction makes this panel the right choice wherever a panel component is seen from more than one direction. Think open-plan kitchen islands with visible end panels and backs, bookcase units that face into a room from both sides, retail fixture shelving where product sits on the shelf and the unit is viewed in the round, or closet systems where the interior and exterior of a shared wall both matter. The 83-5/16 by 110-1/4 inch sheet is large enough to cut a full-height tall-cabinet side in one piece, which eliminates a seam on any door or drawer run that the eye will track continuously. Because the Rovere Agento decor runs as an oak-tone wood grain, it reads warmly across all of those applications without requiring a species-specific finish program.
Surface, Core, and Matching Components
Rovere Agento is a warm, medium-toned oak print rendered in the Vetta finish, which lays a wood-pore emboss over the face. The TFL construction fuses that face at the board level, so the decor does not lift at a profiled edge the way a separately bonded sheet can. The core is CARB2 hardwood particleboard at 19 mm, a density that handles a screw-driven confirmat without pre-drilling and holds shelf-pin holes cleanly over a long run. Matching ABS edgebanding is available in this color to close cut edges so the panel reads as a single material from face to edge. Note that Saviola does not carry matching HPL in the Saviola collection, so countertop work in this color requires a coordinating choice from outside the program.
Who Specifies This Panel
Cabinet shops cutting production runs of kitchen or bathroom cabinetry with visible interiors will find the A/A construction eliminates the sorting step that an A/B panel requires. Millwork firms specifying open display or library units gain the flexibility to orient a component either direction without a backer showing. Designers working in a warm contemporary palette will find Rovere Agento sits comfortably alongside both matte black hardware and natural wood accents. The large sheet size is best suited to shops running a panel saw or beam saw that can handle an 83-by-110 sheet; smaller shops should confirm their equipment before ordering.
Frequently Asked Questions
What does A/A mean for this panel?
A/A means both faces of the panel carry the same decorative face to the same appearance standard. Either side can be the show face, which gives you full flexibility when cutting and orienting parts.
Is matching edgebanding available in Rovere Agento?
Yes. Matching ABS edgebanding in the Rovere Agento decor is available for this Saviola color. Confirm the width you need against your panel thickness before ordering.
What is the Vetta finish?
Vetta is a finish family within the Saviola collection that combines a wood-pore emboss with the printed decor. The texture is pressed into the TFL face, so you can feel the grain structure as well as see it.
Is this panel suitable for a kitchen or bathroom with occasional moisture exposure?
The hardwood particleboard core is not rated for sustained moisture exposure. It is designed for interior dry applications. For a vanity or sink cabinet where spills are likely, look for a panel with a water-resistant core and confirm the published hours before specifying.
How many square feet does one sheet cover?
One sheet at 83-5/16 inch by 110-1/4 inch covers 63.79 square feet. Use that figure for estimating material quantities and comparing cost per square foot against other sheet sizes.
A Finish That Works From Every Angle
When both faces of a panel component need to look finished, this Rovere Agento A/A sheet removes the constraint. Cut the parts, band the edges, and install without worrying about orientation — the work looks right from every direction.
