A Clean Cream Edge That Disappears Into the Panel
This 23 mm ABS edgebanding in Panna (GS98R) is the factory-matched edge companion for Saviola TFL panels in the same color and Vetta finish. At 1 mm thick on a 328-foot production roll, it is sized for cabinet shops running Panna across full kitchens, closet systems, or commercial millwork where the edge has to read as part of the face, not as an afterthought.
Key Features
- Factory color match to GS98R Panna — produced by SALT International to align with the Saviola TFL panel in the same decor, so face and edge read as one surface.
- ABS polymer construction — chlorine-free material clears specifications that exclude PVC and delivers consistent gloss and color reproduction.
- Vetta finish — the surface texture mirrors the Vetta emboss on the matching panel, so the edge does not break the visual and tactile continuity at the corner.
- 23 mm width — sized to overhang a standard 19 mm panel on both faces, leaving enough material for a clean flush trim pass on each side.
- 328-foot production roll — the volume roll for shops running high quantities of one color, minimizing roll changes on the edgebander.
- 1 mm thickness — the standard machine-applied thickness, compatible with hot-melt edgebander application and standard scraper trim sequences.
Where This Edgebanding Does Its Work
Panna is a warm off-white with a light, clean tone that reads well on painted-style and Scandinavian-influenced cabinet work. The Vetta finish gives the surface a subtle texture that softens the look without adding visual noise. This edgebanding closes the cut edges on cabinet boxes, shelf decks, drawer boxes, and door components built from the matching Saviola TFL panel, keeping the color consistent all the way to the raw edge where a router or saw opened the core. It also handles frameless box construction well, where the edge is fully exposed on the assembled interior and the match matters across the full visible surface area.
Material and Finish Construction
ABS banding is the preferred polymer for European decorative panel programs precisely because it is chlorine-free. Where a project specification restricts PVC — increasingly common in healthcare, school, and sustainable commercial interiors — ABS clears the requirement without a substitution conversation. The color and gloss of ABS also hold more precisely through extrusion than PVC, which is why panel makers use it for their own matched programs. The Vetta finish on this roll is the same surface family used on the panel face, so the texture is consistent at the corner rather than visually mismatched. The 1 mm caliper is the standard for machine application on a production edgebander and pairs cleanly with a standard-depth scraper setting.
The Shops and Projects This Roll Is Right For
A 328-foot roll is a production quantity. It makes sense for a cabinet shop that has committed to Panna across a project or a product line, running Saviola TFL panels in volume and needing the matched edge in a format that does not require constant roll changes. It also makes sense for a millwork operation specifying Panna for a commercial interior where large quantities of a single color are standard. For a one-off job or a shop that rarely uses this color, the roll length is the main consideration — the banding itself is the right product regardless of scale, but the economics of a 328-foot roll land best when the shop will use most of it.
Does this edgebanding come pre-glued?
No. This is an unglued roll for machine application with a hot-melt edgebander. If you need a pre-glued roll for hand application, that is a different product format.
Is 23 mm the right width for a 19 mm panel?
Yes. The 23 mm width overhangs a 19 mm panel by 2 mm on each face, giving the trimmer enough material to clean up both sides flush. It is the standard width pairing for 19 mm TFL casework.
Why does the specification call for ABS instead of PVC?
ABS is chlorine-free, which satisfies specifications on commercial, healthcare, and educational projects that exclude PVC. It also reproduces color and gloss more consistently, which is why SALT International uses it for factory-matched edgebanding programs.
Will this banding match the Saviola TFL panel in Panna exactly?
The edgebanding is produced by SALT International to match the Saviola TFL panel in GS98R Panna with Vetta finish. As with any factory-matched program, request a physical sample alongside a panel sample before committing a large run if color consistency is critical to the project.
The Right Edge Closes the Job
A well-matched edge is the detail that separates a finished piece from an assembled one. This Panna ABS edgebanding in the Vetta finish gives a Saviola TFL build the continuous surface it needs — from the face, around the corner, and down the edge — without a color break, a texture mismatch, or a material substitution that could complicate a specification.
