A Thin, Double-Faced Panel Built for Interior Casework in Fumo
The Saviola A/A Decorative Panel in GSP32 Fumo is an 8 mm thermally fused laminate (TFL) panel finished identically on both faces, sized at 83-5/16 inch by 110-1/4 inch and surfaced in the Gessato texture. The smoked, mid-tone gray of Fumo suits contemporary interiors where a quiet, neutral tone anchors the design without competing with hardware or accent materials.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade construction delivers the same decorative face on both sides, so either face can be the show face without any special orientation at the saw.
- 8 mm thickness makes this panel the right choice for drawer bottoms, cabinet backs, and lightweight dividers where a 19 mm board would add unnecessary mass.
- Gessato finish offers a subtly textured, low-sheen surface that adds tactile depth to a flat component without drawing attention to itself.
- 83-5/16 inch by 110-1/4 inch sheet size provides 63.79 square feet of finished surface per sheet, sized to nest tall cabinet parts efficiently.
- CARB2 compliant hardwood particleboard core meets standard commercial and residential formaldehyde emission requirements.
- Matching ABS edgebanding is available in this color so cut edges close cleanly without a visible core line.
Where This Panel Fits the Work
At 8 mm, this panel occupies a narrow but important band in cabinet construction. It is the practical choice for drawer box bottoms, dust frames, cabinet backs on shallow wall cabinets, and interior dividers on units where a full 19 mm would push the finished box past its opening or add weight a mounting system cannot carry. The A/A grade means no face sorting at the table saw and no risk of running the wrong side out on an open component. The Fumo color, a cool charcoal-leaning gray, works naturally in a palette built around matte black hardware, white carcasses, or natural wood veneer accents, giving a designer room to layer without the panel becoming a focal point.
Surface, Core, and Construction
The Gessato finish is a lightly textured TFL surface fused directly to the hardwood particleboard core under heat and pressure, producing a face that is integral to the board rather than a separate sheet that can delaminate at the edge. The texture reads as a fine, consistent grain character that softens the appearance of large flat planes while remaining easy to wipe clean. The hardwood particleboard core is CARB2 compliant and holds machine-driven fasteners reliably across a flat panel run. At 8 mm the sheet is light enough for a single person to handle without a panel carrier, which matters on a busy production day when the 19 mm stock is already staged at the saw.
Right for Shops Running Contemporary Gray Palettes
Production cabinet shops specifying a coordinated gray interior program will find Fumo consistent across sheets, which matters when a run of fifty drawer bottoms needs to read as a single color under an open drawer. Designers working on multifamily or hospitality projects use this panel in closet interiors and wardrobe carcasses where the finish is glimpsed rather than studied closely — the Gessato texture holds up at that viewing distance without looking flat or utilitarian. The sheet size at 83-5/16 inch by 110-1/4 inch also suits shops cutting tall wardrobe backs in a single piece, avoiding a horizontal seam at mid-height.
Can this panel be used for exposed shelf surfaces, or is it better suited to concealed components?
The A/A grade means both faces carry the Gessato finish, so it works on exposed shelves. At 8 mm the panel will need adequate support spacing to resist sag under load — plan shelf pin spacing accordingly for anything carrying meaningful weight.
Does matching edgebanding exist for GSP32 Fumo?
Yes. Matching ABS edgebanding is available in this color from the Saviola collection. Confirm the width you need against the panel thickness when ordering.
Is there matching HPL available for Fumo?
Saviola matching HPL is stocked and available in this color. It ships in two sheet sizes — 73 inch by 120 inch and 60 inch by 120 inch — so shops that cannot process the wider sheet have an option.
What is the square footage per sheet?
The 83-5/16 inch by 110-1/4 inch sheet covers 63.79 square feet. Use that figure for estimating material quantities and comparing cost per square foot against other sheet sizes in the program.
One Sheet, Two Finished Faces, Ready to Cut
The Saviola GSP32 Fumo panel at 8 mm arrives finished and ready for the saw — no face sorting, no secondary finishing, and a color that fits cleanly into contemporary gray palette work from a single panel specification.
