Edge Tape Built for Thick Panels and Short Runs
This 65 mm ABS edgebanding in Rovere Grigio (GSDH2) is the correct match for Saviola decorative panels in this color when the job calls for wider banding or a thicker build-up. The Vetta finish coordinates precisely with the panel face so the cut edge disappears rather than announcing itself. At 54 feet per roll, it is sized for a focused project rather than a full production season, which keeps inventory lean on specialty colors.
Key Features
- 65 mm width gives ample overhang to trim flush on panels up to approximately 19 mm thick, with room for a clean flush-trim pass on both faces.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and suited to specifications that restrict PVC.
- Vetta finish matches the Saviola panel program in Rovere Grigio so face and edge read as one continuous surface.
- 54-foot short roll is the right quantity for a single job or a small run without committing to 328 feet of one color.
- GSDH2 color code is the matching key — the part number and the panel decor share the same code, so ordering the correct band is straightforward.
Where This Banding Earns Its Place
A 65 mm band is not a universal choice — it is the right choice when panel thickness, edge detail, or a double-layer build-up demands more coverage than a 23 mm or 43 mm strip can provide. It suits exposed shelf edges on thicker substrates, stacked panel assemblies, and any edge that will be routed or profiled after banding where extra material is needed for the trimming pass. The Rovere Grigio decor is a cool-toned gray oak that reads well on contemporary cabinet boxes, open shelving, and case pieces where the edge is visible from multiple angles.
Material and Construction
ABS polymer banding is the standard for European decorative panel programs precisely because it holds color and gloss consistently across a roll, takes a clean trim without chipping, and carries no chlorine — a practical advantage where a specification or regional rule limits PVC. At 1 mm, this band has enough body to register cleanly through an edgebander's pressure rollers without telegraphing substrate irregularities. The Vetta finish is a vendor-controlled surface attribute of the Saviola collection, meaning the texture and sheen match what the panel maker applies to the board face itself.
Right Fit for the Job
This roll is sized for cabinet shops running a tight color count, designers ordering for a single install, or contractors finishing a millwork package that specified Saviola Rovere Grigio panels. The 54-foot format means a one-time job does not leave a full production roll sitting on a shelf. For ongoing production work with higher linear footage, the 328-foot roll in the same color and width is the more efficient buy. Pair this band with the matching Saviola TFL panel in GSDH2 to close the full surface in one coordinated program.
What panel thickness does a 65 mm band work with?
65 mm gives enough overhang to edge panels up to 19 mm (3/4 inch) thick with material to spare for a flush-trim pass on both faces. It is also the right width for double-layer or built-up edges where a narrower band would fall short.
Why choose ABS over PVC banding for this color?
ABS is chlorine-free, which satisfies specifications that restrict PVC. Color and gloss stability across the roll are also tighter with ABS, which matters on a mid-tone gray oak where a slight hue shift is easy to spot at a joint.
Is this banding pre-glued?
No. This is unglued banding for use with an edgebander or a glue-pot setup. For hand application with an iron, look for a pre-glued roll in the same color.
Does matching HPL exist for the Saviola collection?
Yes. Saviola matching HPL is stocked in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. Order the 60 inch sheet if your shop cannot process the wider format.
One Color, Closed Edge to Face
Rovere Grigio reads as a finished material when the edge matches the face — and this roll is what makes that happen without a color compromise or a custom-match workaround.
