54-Foot ABS Edgebanding Roll For Single-Job Panel Runs
This Saviola ABS edgebanding delivers a factory-matched edge for panels in the GSP20 Moca color, in a 54-foot short roll sized for the shop that does not want 328 feet committed to one color. At 65 mm wide and 1 mm thick, it covers the full face of a thick panel and trims flush cleanly. The Gessato finish mirrors the texture family of its companion TFL panels, so the edge reads as a continuation of the face rather than an afterthought.
Key Features
- Matched to GSP20 Moca in the Saviola collection, coordinating color and texture with the companion TFL panel face.
- Gessato finish texture aligns with the emboss of the panel decor, so the edge transitions seamlessly across the joint.
- 65 mm width provides generous overhang on thick panels, giving the edgebander enough material for a clean flush trim on both faces.
- 54-foot roll length is the right buy for a single project or a small run without committing inventory to a full production roll.
- ABS polymer construction is chlorine-free, clearing specifications that exclude PVC and satisfying sustainability criteria common in commercial work.
- 1 mm thickness machines predictably on standard edgebanding equipment, holds a crisp corner, and withstands everyday contact.
Where This Roll Fits in the Job
The 65 mm width is the widest option in the Saviola edgebanding program and is selected when the panel is thick enough that a narrower band would leave insufficient overhang for an A/A trim. A 54-foot short roll covers approximately one to three typical cabinet runs, depending on part count and size, making it the practical buy for a kitchen refresh, a closet installation, or a commercial accent wall where Moca panels anchor the design. It is the option that keeps leftover inventory low when the color appears on only one project in the queue.
Material and Performance
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a polymer that bonds consistently, machines without chipping, and holds color stability through the life of the installation. Unlike PVC, ABS is chlorine-free, which matters in specifications for LEED projects or any build that restricts halogenated materials. The 1 mm thickness is thick enough to handle contact on a cabinet edge without delaminating but thin enough to disappear in the joint line once trimmed. The Gessato surface finish provides a tactile texture that discourages fingerprint accumulation and maintains a consistent appearance alongside the panel face under varied lighting.
Who Orders This Width and Why
Cabinet shops building custom kitchens or bath vanities in GSP20 Moca panels reach for the 65 mm roll when their panel thickness calls for wider coverage. Commercial millwork fabricators working on retail fixture builds or hospitality interiors use it when the design calls for a thick horizontal shelf or a substantial partition edge. Designers specifying the Saviola Moca collection for a single high-visibility installation find the 54-foot short roll the right quantity to order without wasteful overage. The material handles the same on a manual edgebander as on a production machine, so shop size is not a constraint.
Is this banding pre-glued or does it require a separate adhesive?
This roll is not pre-glued. It is applied with a hot-melt adhesive on an edgebander in the normal way. Pre-glued iron-on banding is a separate product type intended for repairs and small-shop use without a machine.
Does the 65 mm width work on panels thinner than 19 mm?
It will apply and trim on any panel thickness, but the overhang on a thinner panel will be larger than on a thick one. Most shops use 23 mm banding on 19 mm panels and reserve 65 mm for thicker stock. If your panel is standard 19 mm, check the 23 mm roll for this color.
Will this banding match Saviola Moca panels from a different production run?
The banding is produced by the same vendor to the GSP20 Moca color specification, so the match is as consistent as the panel program allows. As with any wood-decor color, minor batch variation can occur. If color consistency across a large job is critical, order panels and banding together from the same lot.
Is matching HPL available in GSP20 Moca for countertop work?
Matching HPL is available for the Saviola collection in this color. It ships in two sheet sizes, so you can select the one your shop can handle. The edgebanding and the HPL share the same color code, keeping the specification consistent across all surfaces.
The Right Edge for a Matched Moca Installation
A panel edge finished in the same color, texture, and material as the face turns a cut sheet into a complete surface. This 65 mm Gessato roll gives fabricators the width and the quantity to close out a Moca project cleanly, without committing to a production roll that outlasts the job.
