Saviola Decorative Panel for Bold, High-Contrast Casework
The Saviola A/A decorative panel in GSDU6 Lava brings a dramatic Tigerwood finish to cabinet boxes, open shelving, and architectural millwork that needs visual weight on both faces. Finished identically on front and back, this 19 mm thermally fused laminate panel ships ready to cut and band with no secondary finishing step.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade construction means both faces carry the same decorative finish, so either side can face the room.
- GSDU6 Lava in a Tigerwood texture delivers a pronounced, high-contrast wood-grain character that reads as intentional and graphic.
- 83-5/16 inch by 110-1/4 inch sheet size yields tall cabinet parts and full-height closet components from a single sheet.
- 19 mm thickness suits standard confirmat joinery and pairs with 23 mm edgebanding for a clean, flush edge.
- Thermally fused laminate face bonds the decorative layer directly to the core with no glue line to open at the edge over time.
- Matching ABS edgebanding is available in this color, so cut edges read as a continuous surface rather than an exposed core.
Where This Panel Works
The Lava Tigerwood finish is a strong choice for contemporary kitchen islands, media walls, and retail fixture builds where the design calls for a bold, wood-toned surface. Because both faces are finished identically, it works equally well for open-sided cabinet boxes, room dividers, and display shelving where the inside of the piece is as visible as the outside. A shop cutting frameless boxes for a high-contrast kitchen or a designer specifying a statement wardrobe wall will find the sheet size efficient for tall parts without additional joinery to gain height.
Construction and Finish Details
Saviola panels use a thermally fused laminate process: the decorative paper is impregnated with melamine resin and fused to the core under heat and pressure, becoming part of the board rather than a separate sheet that can delaminate. The Tigerwood emboss follows a deep wood-pore structure that registers against the printed pattern, so the face holds its character under raking light. Core type and compliance documentation for this SKU follow standard Saviola program specifications — confirm CARB2 and TSCA Title VI documentation through the product data sheet for the specific production run.
Who Orders This Panel
Cabinet shops running frameless construction in a contemporary palette reach for this panel when the specification calls for something bolder than a neutral solid. The sheet size handles full-height doors and tall box sides without piecing, which keeps the cut list tight. Designers working on commercial interiors, retail environments, or high-end residential millwork use the Lava color to anchor a room without adding painted elements. The A/A grade removes the layout decision about face orientation, which matters when both sides of a component are customer-facing.
Is matching edgebanding available for GSDU6 Lava?
Yes. Saviola matching ABS edgebanding is available in this color. Order it alongside the panel to close cut edges in the same decor.
What does A/A mean on a Saviola panel?
A/A means the same decorative face appears on both sides of the board. Either face can show — there is no backer side or secondary-grade back. It is the right choice when the panel will be visible from both faces, such as an open shelf or a room divider.
Is matching HPL available for Saviola panels?
Yes. Saviola HPL is stocked in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. Use the matching HPL to carry the Lava color onto a countertop or a high-wear horizontal surface the panel program does not cover directly.
How is the sheet size useful for tall cabinet components?
At 110-1/4 inches long, the sheet accommodates a full-height closet side or a tall kitchen cabinet end panel without a horizontal joint. The 83-5/16 inch width lets a shop nest multiple narrower parts across the sheet to reduce waste.
Does the Tigerwood texture line up with the printed pattern?
The Tigerwood finish is embossed with a wood-pore structure. Whether the emboss is fully registered to the print is best confirmed by requesting a sample, which will show how the texture and the grain pattern interact under light.
A Finish That Does the Work Without a Finish Step
GSDU6 Lava arrives factory-finished on both faces, so the panel goes straight from the saw to the cabinet without a spray booth, stain schedule, or drying time — the Tigerwood character is built in, and matching edgebanding keeps it consistent all the way to the edge.
