Tigerwood Character, Clean Edge Finish
This Saviola ABS edgebanding in Tiger Eye (GSDS2) brings the warm, figured tone of a tigerwood decor to the cut edge of your panel. At 43 mm wide and 1 mm thick, it is sized for thicker panel stock and ships on a 54-foot roll — a short-run quantity that suits focused projects without committing to a full production roll.
Key Features
- Tiger Eye tigerwood decor (GSDS2) matches the Saviola panel color so face and edge read as one continuous surface.
- 43 mm width provides enough overhang to trim flush on panels thicker than the standard 19 mm range, including thicker tabletop and carcass stock.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and holds a precise color and gloss match across production runs.
- 54-foot roll is the short-run format — right-sized for a single job or a small batch without excess inventory.
- Heat-activated application works with standard edgebanding machines and zero-joint glue systems.
Where the 43 mm Width Earns Its Keep
Edgebanding width is a function of panel thickness, and 43 mm is the specification for thicker stock. If the job calls for 25 mm carcass panels, a deep-lipped door, or a tabletop edge that needs a clean trimmed reveal on both faces, the 43 mm band gives the applicator enough material to flush-trim without chasing the overhang. The Tiger Eye decor also shows well on a wider edge — the tigerwood figure has enough visual mass to fill the face rather than appearing as a thin stripe at the panel edge. Furniture builders, custom closet fabricators, and commercial millwork shops that spec the Saviola Tiger Eye panel will find this the natural companion piece.
ABS Material and the Saviola Color Match
ABS edgebanding is chlorine-free, which matters wherever a specification excludes PVC — healthcare projects, LEED submittals, and school and government interiors are common examples. Beyond the specification advantage, ABS holds its color and gloss across the roll with the consistency a color-matched program depends on. The Tiger Eye decor in the Saviola collection carries a warm amber-to-brown tigerwood figure, and the banding is produced to the same color standard as the panel face. Applied correctly, the joint between face and edge disappears. The 1 mm thickness is the standard for cabinet and furniture work — substantial enough to survive handling and machining without being visible as a built-up edge.
Right for Projects That Specify Saviola Tiger Eye
The 54-foot short roll is the format that fits a single-job shop or a finishing run rather than a high-volume production line. A cabinet maker closing out a kitchen, a millwork shop wrapping a run of display cases, or a custom furniture builder edging a handful of panels can use this roll without tying up capital in 328 feet of one color. For production shops running Tiger Eye in volume, the longer roll format is the better operating choice — but for everyone else, the 54-foot roll is the practical unit. This banding is an indoor product and belongs on interior casework, furniture, and millwork wherever the Saviola Tiger Eye panel goes.
Will this banding work on a panel that is thicker than 19 mm?
Yes. The 43 mm width is specifically chosen for thicker panel stock. It gives you enough overhang to flush-trim both faces cleanly on panels beyond the standard 19 mm thickness, including 25 mm carcass and tabletop material.
Why does this roll come in 54 feet rather than 328 feet?
The 54-foot short roll exists for jobs where one color covers a limited run. It avoids tying up a production-length roll in inventory when the job does not justify it. If Tiger Eye is running continuously in your shop, the longer roll is the more economical format.
Does ABS edgebanding require different equipment than PVC?
No. ABS processes on the same edgebanding machines as PVC and responds to the same hot-melt adhesive systems. The difference is material composition, not application method — ABS is chlorine-free and preferred on specifications that restrict PVC.
Is this banding only for use with Saviola panels?
It is produced to match the Saviola Tiger Eye panel decor. If you are edging a different panel in a close tigerwood tone, the color registration against the face may not be exact. For a guaranteed match, use it alongside the GSDS2 Saviola panel.
Finish the Edge as Cleanly as the Face
Tiger Eye is a decor that carries weight on the face — extending it consistently to the cut edge with matched ABS banding keeps the finished piece looking like a deliberate material choice rather than an afterthought at the edge.
