Edgebanding For Wider Panels and Deeper Edge Profiles
This 43mm ABS edgebanding in Rovere Agento (GSDH1) is the matching edge solution for Saviola TFL panels finished in the Vetta texture, closing cut edges so the face and edge read as one continuous surface. The 54-foot short roll is sized for jobs that need the right color without committing to a full production quantity.
Key Features
- Rovere Agento (GSDH1) color match — engineered to coordinate with Saviola panels in this decor so the edge disappears against the face.
- 43mm width — sized to overhang a 19mm panel on both faces, leaving enough material to trim flush cleanly.
- 1mm ABS construction — chlorine-free polymer that satisfies specifications where PVC is restricted.
- Vetta finish — the surface texture follows the Vetta emboss family, keeping the edge consistent with the panel face under raking light.
- 54-foot roll — a short-run quantity suited to single jobs or color trials without the commitment of a full 328-foot production roll.
Where the 43mm Width Earns Its Place
Standard 23mm banding covers a 19mm panel with minimal overhang and is the default choice for most flat work. The 43mm width steps in when the design calls for a more substantial edge presence: thick stacked panels, lipped doors where the banding wraps a built-up edge, or any profile where a narrow strip would leave the core exposed after trimming. It also suits shops running 25mm or thicker substrate who want a single banding pass rather than a fill-and-band sequence. For Rovere Agento casework that mixes standard and heavy-wall components, stocking the 43mm roll alongside the 23mm means the color stays consistent across every edge in the job.
ABS Material and Vetta Surface
ABS is the preferred banding polymer for European decorative panel programs and for any specification that rules out PVC. At 1mm thick it applies cleanly on a standard edgebander, bonds well with hot-melt adhesive, and trims to a sharp corner without chipping. The Vetta finish is a structured texture in the Saviola collection, and the banding carries that same surface character so there is no visible mismatch where the edge meets the face. Rovere Agento is an approved vendor color name — the spelling is exact and intentional.
Who Reaches for This Roll
Cabinet shops producing Saviola Rovere Agento work in modest run lengths will find the 54-foot short roll practical: enough to band a bathroom vanity, a run of floating shelves, or a small closet system without leftover inventory. Designers specifying Saviola panels for a single residential project can confirm the edge match before the full panel order ships. Shops that run both 19mm and thicker panels in the same color can use this roll for the heavy-wall components while the 23mm roll handles the standard work, keeping GSDH1 consistent across the entire job.
Does this banding require a dedicated edgebander, or can it be applied by hand?
A standard edgebander with a hot-melt glue system handles 1mm ABS without any special setup. Hand application with an iron is possible for repairs or very short runs, but a machine bond is more durable and gives a cleaner trim on the 43mm width.
Is the 54-foot roll available in other widths for Rovere Agento?
Yes. Saviola edgebanding in GSDH1 is also available in 23mm width as a short roll, and both the 23mm and 43mm widths come in a 328-foot production roll for higher-volume work. The 65mm width is available on the longer roll only.
What Saviola panel thickness does the 43mm width pair with?
The 43mm strip trims flush on panels up to roughly 38mm, giving comfortable overhang for the standard 19mm board and remaining practical on panels up to 25mm or on built-up assemblies. For a simple 19mm cabinet box the 23mm width is the more common choice; 43mm is the right call when the edge needs more coverage or the design has a thicker profile.
Is Rovere Agento a current stocking color?
Rovere Agento (GSDH1) has a discontinuation notice and is selling through existing inventory. It is fully orderable while stock lasts, but it is not recommended for projects with a planned reorder — choose an active color if the run may be extended.
One Color, Every Edge
Matching banding from the same Saviola program means Rovere Agento reads as a single material from face to edge, which is the only outcome worth having on finished casework.
