Calicot-Finish ABS Edgebanding for Thick-Panel and Wide-Edge Work
This 65 mm ABS edgebanding in Anthracite Linen (GSX7R) is the matching edge component for Saviola TFL panels in the same color and finish family. The Calicot surface texture and dark linen tone carry the decorative face all the way to the cut edge, so shelves, partitions, and case sides read as finished components rather than faced boards. The 54-foot short roll is sized for single-job quantities without committing to a full production roll.
Key Features
- Calicot texture matches the embossed surface of the corresponding Saviola panel face for a continuous look edge to edge.
- 65 mm width provides enough overhang on thicker panels and wide-edge applications to trim flush cleanly on both faces.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and suited to automated edgebanding equipment.
- Anthracite Linen (GSX7R) color pairs directly with Saviola panels in this decor for a factory-matched edge.
- 54-foot roll covers a focused run or a single cabinet project without over-buying on a short job.
Where This Edgebanding Fits the Work
The 65 mm width is chosen for situations where a standard 23 mm band falls short: thick panel stacks, exposed double-layer edges, or design details that call for a wider visible edge. It also suits shops running panels on the wider end of the 19 mm-plus range where a narrower band would trim too tight. The Calicot texture and Anthracite Linen tone make this a natural call for contemporary open-shelf casework, store fixture builds, and commercial millwork that uses the Saviola palette. Any time the panel face is GSX7R, this is the edgebanding that closes the cut edge without a visible mismatch in color or surface character.
Material and Surface Details
ABS polymer is the preferred edge material for specifications that exclude PVC, and it holds color and dimension consistently across the temperature swings a busy shop floor produces. The chlorine-free formulation clears the environmental requirements common in commercial and institutional projects. At 1 mm, the band is thick enough for a clean machine trim and a durable finished edge, while remaining compatible with standard edgebanding equipment. The Calicot finish is a named texture in the Saviola program, not a generic matte — it is the same surface character pressed into the face of the panel, so the edge and face share both tone and relief when trimmed flush.
Who Orders This Roll
Cabinet shops finishing a Saviola GSX7R run will use this roll to close exposed edges on case sides, fixed shelves, and door blanks. The 54-foot quantity suits a mid-size cabinet order or a focused commercial millwork scope where buying a 328-foot production roll would leave most of it on the shelf. Designers and contractors specifying the Saviola color program also use the short roll for site-repair quantities or sample builds before a larger production run. If the job scales up, the same color is available in a longer production roll through the same program.
Is this edgebanding pre-glued or does it require a separate adhesive?
This roll is unglued and is intended for edgebanding machines that apply hot-melt adhesive during the banding operation. It is not an iron-on product.
Does the Calicot finish on the edgebanding match the texture on Saviola panels in color GSX7R?
Yes. Calicot is a named finish family in the Saviola program, and the edgebanding is produced to match the same emboss and tone as the panel face. Trim it flush and the edge reads as a continuation of the surface, not a separate component.
Why would I choose the 65 mm width over the 23 mm or 43 mm options?
The 65 mm band is the right choice when the panel edge is thick enough, or the design detail wide enough, that a narrower band would trim too close or not cover fully. It also works for double-panel edges and for decorative wide-edge details on contemporary casework.
Can I use this edgebanding with panels from other collections or brands in Anthracite tones?
The color and texture are matched specifically to the Saviola GSX7R decor. Close-color matches to other programs are possible but not guaranteed — always request a physical sample before committing to a production run with a different panel.
A Finished Edge on Every Cut
Matched edgebanding is the last step between a cut panel and a finished component, and choosing the right color and texture on the first order keeps the job moving without a return trip to the supplier.
