Tigerwood Character, Clean Edge Finish
This ABS edgebanding brings the Lava Tigerwood decor from the Saviola collection to every cut edge of your panels. At 23 mm wide and 1 mm thick, a single 328-foot roll carries the color through a full project run without switching stock mid-job.
Key Features
- Saviola collection match — produced in the GSDU6 Lava decor to align with Saviola TFL panels in the same color.
- ABS polymer construction — chlorine-free material that clears specifications where PVC edgebanding is restricted.
- 23 mm width — sized to trim flush on a 19 mm panel with enough overhang on both faces to clean up cleanly.
- 1 mm thickness — compatible with standard edgebanders and manual application equipment.
- 328-foot production roll — enough linear footage to edge a full shop run from one roll without a splice.
- Tigerwood finish — a bold, figured grain character that makes a cut edge a feature rather than an afterthought.
Where This Edgebanding Earns Its Place
The Lava Tigerwood decor is not a background color. It carries a pronounced, open-grain figure that reads from across a room, and an unfinished cut edge breaks that look immediately. This banding closes the edge so shelving, cabinet boxes, and door panels in GSDU6 Lava read as complete, intentional components rather than faced boards. It works equally well on a high-contrast retail fixture where the Tigerwood decor is doing design work and on a residential entertainment unit where the grain is the feature material. Any panel application that puts a cut edge in view is the right situation for this roll.
ABS Material and Long-Run Reliability
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer that meets specifications ruling out PVC. It bonds cleanly on a standard edgebander and holds the joint through the temperature and humidity shifts a finished cabinet sees in a conditioned interior. The 1 mm caliper gives the edge enough body to survive handling and installation without adding a visible step at the face-to-edge transition. Color and texture consistency run the length of the roll, so the first foot and the last foot of a production run match.
Who This Roll Is For
Cabinet shops running Saviola GSDU6 Lava panels are the primary buyer here — this is the vendor-matched banding for that decor, and using it is the straightforward way to carry the color from the face to the edge without color-matching guesswork. Millwork shops building retail fixtures or display casework in a figured wood decor will find the same logic applies. Designers specifying the Saviola collection can call this out by part number to ensure the installer sources the correct match rather than approximating with a third-party banding. The 328-foot roll suits shops processing multiple sheets in a single run; smaller shops finishing one or two panels at a time will still find the roll the right buy when the decor is a committed project color.
Does this banding come pre-glued?
This is an unglued roll intended for machine application with a hot-melt glue pot or a standard edgebander. It is not an iron-on product.
Can I use this banding on panels thicker or thinner than 19 mm?
The 23 mm width trims flush on 19 mm stock and works on panels in a similar thickness range. On significantly thinner or thicker stock the overhang changes, and a different width may produce a cleaner result.
Is this the only width available for GSDU6 Lava?
Saviola matching edgebanding is available in multiple widths. If your application calls for a wider banding, check the Saviola edgebanding listings for this color to confirm which widths are stocked.
Why choose ABS over PVC banding for this color?
ABS is chlorine-free, which matters when a project specification or a regional requirement restricts PVC content in finished goods. For standard commercial or residential casework where neither restriction applies, both materials perform comparably in conditioned interiors.
One Roll, Every Edge in the Room
A 328-foot roll of vendor-matched ABS banding means a shop committed to GSDU6 Lava can edge every panel in a project from a single stock item, keeping the color consistent from face to edge throughout the build.
