Matching ABS Edgebanding For Saviola Gray Oak Panels
This 43 mm ABS edgebanding in Rovere Grigio (GSDH2) is the manufacturer-matched edge solution for Saviola collection panels in this color, produced by SALT International in the Vetta finish. The short 54-foot roll is sized for finishing a single job or a small run without committing to a full production roll.
Key Features
- Manufacturer color match: Produced by SALT International to align with Saviola TFL panels in Rovere Grigio, so face and edge read as one surface.
- ABS construction: Chlorine-free acrylonitrile butadiene styrene material, suitable where PVC is excluded by specification.
- 43 mm width: Sized to trim flush on panels up to approximately 19 mm thick with sufficient overhang on both faces for a clean finish pass.
- 1 mm thickness: Consistent caliper across the roll for reliable machine feed and even glue-line performance.
- Vetta finish: Surface finish matched to the Vetta texture family within the Saviola collection, keeping the edge consistent with the panel face character.
- 54-foot short roll: Right-sized for small shops or single-project orders where a 328-foot production roll is more than the job requires.
Where This Edgebanding Works
Rovere Grigio is a gray oak decor used across cabinet boxes, door fronts, shelving, and wall paneling in contemporary residential and commercial interiors. Anywhere a Saviola panel in GSDH2 meets a cut edge, this banding closes it so the core stays hidden and the color reads continuously around the component. The 43 mm width handles the standard 19 mm panel thickness used in most casework, with enough overhang for a standard edgebander trim pass. It is equally at home on a manual edgebanding station or a production machine.
Material and Finish
ABS edgebanding is chlorine-free, which matters on commercial and institutional projects where specifications exclude PVC materials. The banding is extruded from ABS polymer and finished to match the Vetta surface family of the Saviola collection. Vetta is a structured finish with a defined texture character, and the edgebanding surface is produced to carry that character across to the edge so a tight joint between face and band does not show a visible texture break. Color consistency is controlled against the SALT International Saviola color program, so GSDH2 from the panel and GSDH2 from the roll share the same reference.
Who Reaches For This Roll
Small cabinet shops finishing a bath vanity, closet system, or kitchen in Rovere Grigio will find the 54-foot roll a practical size that does not leave a large surplus. Designers and contractors sourcing matching components for a Saviola panel specification can confirm the color code directly against the panel order. The short roll also suits a repair or touch-up situation where only a few linear feet are needed and a production roll is impractical. For high-volume production runs in this color, the 328-foot roll in the same 43 mm width is the more efficient choice.
Is this banding pre-glued?
No. This roll is unglued and intended for application with a glue pot or edgebanding machine. For a pre-glued option, check the product listing details or contact the sales team.
Can I use this banding on non-Saviola panels in a similar gray oak color?
The banding is matched to the SALT International Saviola color program. On other brands' gray oak decors the color and texture may not align closely enough for a finished installation. Request a sample before committing the job.
Does SALT International make a 23 mm roll in Rovere Grigio as well?
Yes. The Saviola collection edgebanding is available in 23 mm, 43 mm, and 65 mm widths. The 23 mm width comes in the 328-foot production roll; the 43 mm and 65 mm widths are available in both the 54-foot short roll and the 328-foot roll.
What panel thickness does the 43 mm width cover?
The 43 mm width is the standard choice for 19 mm panels, providing enough overhang on both faces for a trim pass. It will also work on thinner stock where a wider overhang is acceptable before trimming.
A Clean Edge, Color for Color
Matching edgebanding from the same color program is the simplest way to ensure a cut edge disappears into the panel face, and the 54-foot short roll makes that match accessible without overbuying for a focused project.
