Saviola Decorative Panel in Carbone with a Vetta Finish, 83-5/16" width x 110-1/4" length, 19 mm Thick

Deep Color, Full Coverage, and a Face Built for Both Sides

The Saviola Carbone panel is a 19 mm A/A thermally fused laminate sheet in GSDH3 Carbone, a rich, dark tone finished in Vetta texture on both faces. At 83-5/16 inches by 110-1/4 inches, it ships as a large-format sheet sized for cabinet boxes, shelving, and interior components that need a finished appearance on every visible surface.

Key Features

• 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
• 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
• A/A grade pair: both faces carry the same decorative Carbone decor, so either side can show without a second operation.
• Vetta finish: a structured texture that adds tactile depth to the dark face and reduces surface reflectivity.
• 19 mm thickness: a standard cabinet-box dimension that pairs directly with confirmat fasteners and 23 mm edgebanding.
• Large-format sheet: 83-5/16 inches by 110-1/4 inches yields 63.79 square feet per sheet, well above a standard 4 x 8.
• CARB2 compliant hardwood particleboard core: meets North American formaldehyde emission requirements for residential and commercial work.
• Matching ABS edgebanding available: Saviola Carbone edgebanding closes cut edges in the same decor so the panel reads as one continuous surface.

Where This Panel Works

A/A construction makes Carbone the right call wherever a panel edge or back is exposed in the finished piece. Open-back bookcases, room dividers, freestanding closet systems, and islands that sit away from a wall all demand a finished reverse. The large sheet size reduces the number of seams in a run of tall cabinet boxes, and the dark Carbone tone holds its own in contemporary kitchens, retail fixtures, and commercial interiors where a bold, graphic surface is part of the design intent. Cabinet shops running high-volume dark-color work will also find that A/A construction removes a planning step: there is no need to track face orientation through the cut list.

Surface, Core, and Build

TFL fuses the Carbone decor directly into the board surface under heat and pressure, so there is no adhesive layer to separate at the edge and no glue line visible after trimming. The Vetta texture is pressed into both faces during the same operation, giving the panel a consistent look and feel regardless of which face is forward. The hardwood particleboard core is CARB2 compliant and machines cleanly with standard tooling. At 19 mm the board holds a machine-driven fastener well and keeps its dimensions flat across a wide panel run. Matching ABS edgebanding is available in this color, so the cut edge closes in the same Carbone decor rather than revealing the core.

Who Reaches for This Sheet

Cabinet shops specifying a contemporary dark palette use A/A Carbone for the box itself, not just the door, because every interior surface stays on-finish whether the door is open or the back is visible. Designers working on retail environments and commercial millwork choose it when the brief calls for a graphic, high-contrast interior. Closet and storage system builders appreciate the sheet format: fewer seams across a tall run means less edgebanding time and a cleaner result. For any application where both panel faces will be seen, A/A is the only grade that delivers without extra shop steps.

Frequently Asked Questions

A Panel That Finishes the Whole Job

Saviola Carbone A/A in the Vetta finish gives a contemporary dark-panel project a consistent, finished surface on every face the eye lands on, from the box interior to the visible back, without extra shop steps or a second material in the cut list.