Powermatic PM1000-TKLPRK .079" Low Profile Riving Knife
Item # JPW1791793
•Mfr # PM9-1791793
$47.97
/Each
Min Order: 1
Qty mult. by: 1
Product Details
The riving knife rises and lowers with the blade, thus maintaining very small clearance between itself and the blade. This helps prevent rotational kickback, by keeping the kerf from binding when it has cleared the blade. The low profile knife sits just below the apex of the blade, and doesn't require removal when doing non-through cuts. And the thin kerf feature allows the use of thinner blades to reduce kerf waste.
• Rises and lowers with the blade, thus maintaining blade/knife distance.
• Helps prevent binding and kickback.
• Remains installed for non-through cuts.
• The 0.079 inch thickness allows use of thinner blades for less kerf waste.
• Rises and lowers with the blade, thus maintaining blade/knife distance.
• Helps prevent binding and kickback.
• Remains installed for non-through cuts.
• The 0.079 inch thickness allows use of thinner blades for less kerf waste.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Length | |
| Material | |
| Product Type | Riving Knife |
| Width | |
| Number of Sides |
Item # JPW1791793
•Mfr # PM9-1791793
$47.97
/Each
Min Order: 1
Qty mult. by: 1
Product Details
The riving knife rises and lowers with the blade, thus maintaining very small clearance between itself and the blade. This helps prevent rotational kickback, by keeping the kerf from binding when it has cleared the blade. The low profile knife sits just below the apex of the blade, and doesn't require removal when doing non-through cuts. And the thin kerf feature allows the use of thinner blades to reduce kerf waste.
• Rises and lowers with the blade, thus maintaining blade/knife distance.
• Helps prevent binding and kickback.
• Remains installed for non-through cuts.
• The 0.079 inch thickness allows use of thinner blades for less kerf waste.
• Rises and lowers with the blade, thus maintaining blade/knife distance.
• Helps prevent binding and kickback.
• Remains installed for non-through cuts.
• The 0.079 inch thickness allows use of thinner blades for less kerf waste.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Length | |
| Material | |
| Product Type | Riving Knife |
| Width | |
| Number of Sides |