A Double-Faced Panel For Casework That Shows On Both Sides
The Saviola GSP24 Noce Vanguard A/A decorative panel delivers a rich, dark walnut-toned TFL face on both sides, making it the natural choice for open shelving, cabinet boxes, room dividers, and any component where the back face is as visible as the front. At 83-5/16 inches by 110-1/4 inches and 8 mm thick, this panel is sized for efficient nesting on demanding cut lists.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade construction brings the same Noce Vanguard decorative face to both sides, so neither face needs to be hidden.
- Vanguard finish is a structured surface texture that adds tactile depth and resists the flatness of plain matte faces.
- 8 mm thickness suits back panels, lightweight partitions, and door inserts where a full 19 mm board adds unnecessary weight.
- Oversized sheet format at 83-5/16 inches by 110-1/4 inches (63.79 sq ft per sheet) gives large-scale cut lists more usable parts per sheet than a standard 4 by 8.
- Thermally fused laminate surface bonds the decorative face directly to the core, leaving no glue line to open at the edge.
- Matching ABS edgebanding is available in this color, so cut edges close out in the same Noce Vanguard decor.
Where This Panel Fits The Work
Noce Vanguard reads as a warm, medium-to-dark walnut character that works across contemporary and transitional interiors without leaning too rustic or too stark. The A/A construction opens up applications an A/B panel cannot fill: a floating shelf that is seen from above and below, a cabinet island with exposed end panels, a wardrobe back that faces into the room, or a retail fixture where the interior is part of the display. At 8 mm, the panel also fills a common production gap between a full-thickness carcass board and a thin back panel, hitting a weight and rigidity point that suits sliding door inserts, lightweight cabinet backs, and partition infills.
Construction and Surface Detail
TFL construction fuses the decorative layer to the core under heat and pressure, making the face an integral part of the board rather than a bonded sheet. There is no adhesive layer to fail at the edge, and the surface is consistent from one end of the sheet to the other. The Vanguard finish gives the face a structured texture that catches light directionally, adding visual interest to a large flat surface and helping the walnut pattern read as dimensional rather than printed. Because both faces carry the same construction, the panel lays flat without the stress differential that causes A/B boards to bow when humidity shifts.
Who Orders This Panel
Cabinet shops specifying a walnut-character interior that needs to hold up under daily contact reach for this panel when they need both faces finished and the job does not justify the weight of a 19 mm board. Designers specifying open-back display cases, glass-door cabinets, or feature shelving in a dark walnut palette use the A/A grade to keep the spec clean without a separate back-painting step. Contractors building out commercial fixtures, hotel millwork, or retail casework with exposed backs find the oversized sheet reduces the number of seams on long horizontal runs. The 8 mm thickness and large format also suit tall sliding door panels and wardrobe backs where a thicker board adds cost and weight without structural benefit.
What does A/A mean on this panel?
A/A means both faces carry the same Noce Vanguard decorative surface to the same appearance grade. Either face can be the show face, which is what separates this panel from an A/B construction where one side is finished to a looser standard.
Is matching edgebanding available for GSP24 Noce Vanguard?
Yes. Matching ABS edgebanding is available in the Saviola collection for this color, so cut edges can close out in the same decor as the face.
Can this 8 mm panel be used as a cabinet back or sliding door insert?
Yes. The 8 mm thickness is well suited to routed-in cabinet backs, sliding door inserts, and lightweight partition infills where a 19 mm board would add unnecessary weight and bulk.
Is matching HPL available for the Saviola collection?
Yes. Saviola matching HPL is stocked in two sheet sizes: 73 inches by 120 inches and 60 inches by 120 inches. Use the 60-inch sheet if your shop cannot handle the wider format.
How many square feet does one sheet cover?
The 83-5/16 inch by 110-1/4 inch sheet yields 63.79 square feet. That figure is the sheet area for estimating and pricing; usable yield depends on your cut list and layout.
Finish The Job Without Compromise
When the design calls for a walnut character that holds up on every visible face, the Saviola GSP24 Noce Vanguard A/A panel removes the workaround. Both faces are finished, the sheet is sized for large runs, and matching components keep the color consistent from panel to edge to countertop surface.
