Soft Brushed Oak ABS Edgebanding For Pura Vita Veneer Panels
This ABS edgebanding is the factory-matched edge finish for the Pura Vita Rovere Milano (PVRM03) collection, carrying the Natural Milano Oak Soft Brushed character from the panel face onto every cut edge. At 43 mm wide and 1 mm thick, the strip is sized to trim flush on the veneer panel stock it accompanies, closing the edge so the finished component reads as one continuous surface rather than a faced board with an exposed core.
Key Features
- Factory-matched to Pura Vita PVRM03 Rovere Milano — the decor and soft brushed texture are produced to align with the panel face, not approximated from a universal wood grain stock.
- ABS polymer construction — chlorine-free material that meets specifications where PVC edgebanding is restricted.
- 43 mm width — sized to overhang the panel thickness for a clean trim-flush finish on both faces without additional shimming.
- 1 mm thickness — standard machine-applied profile compatible with production edgebanders and benchtop units.
- 54-foot short roll — a job-sized quantity that avoids committing a shop to a full production roll for a single run or a repair.
- Natural Milano Oak Soft Brushed finish — the surface treatment adds tactile depth along the grain, consistent with the Pura Vita veneer panel program.
Where Matched Edgebanding Makes the Difference
A Pura Vita veneer panel is a real wood product, and the cut edge exposes the core the moment a saw touches it. Bringing that edge back to the face appearance requires a band the panel maker has matched to the same decor plate and finish family. Rovere Milano reads as a straight-grained light oak with a lifted, brushed texture — characteristics that a generic wood-grain ABS from a third-party roll will not replicate closely enough for a tight joint or a revealed edge detail. This roll closes shelf ends, door edges, and drawer fronts in the same color and surface character as the panel itself, keeping the assembly coherent under both direct light and angled viewing.
Material and Finish
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a thermoplastic that bonds cleanly through a standard hot-melt glue line and trims without chipping on a scorer or a hand trimmer. Because ABS is chlorine-free, it satisfies commercial and institutional specifications that exclude PVC, and it holds color and gloss consistency better than PVC across a production run. The soft brushed surface on this roll is coordinated to the Pura Vita veneer program's finish treatment — the same light brushing that lifts the grain on the panel face appears on the banding, so the edge does not look like a flat printed strip next to a textured wood surface.
Who Should Order This Roll
Cabinet shops running Pura Vita Rovere Milano panels for closet systems, open shelving, or architectural casework will use this roll to complete components that show an edge. The 54-foot quantity suits a single project or a small production batch without the commitment of a full 328-foot roll, making it practical for shops building one kitchen's worth of panels or completing a punch-list repair on an installed job. Designers specifying Pura Vita by part number can call out PVRM03.43 alongside the panel SKU to ensure the edge band is sourced from the same matched program rather than substituted at the shop level.
Does this banding work with the Pura Vita A/A panel as well as the A/B panel?
Yes. The edgebanding is matched to the Rovere Milano decor and finish, not to a specific grade pair. Use it on whichever Pura Vita PVRM03 panel is in the job.
Is 43 mm the right width for a 19 mm panel?
Yes. The 43 mm band provides enough overhang on both faces of a standard panel thickness to trim flush cleanly. If your panel is thicker, confirm the width against your specific stock before ordering.
Can I apply this with a standard production edgebander?
Yes. At 1 mm thick, this banding runs through production edgebanders and benchtop machines without special setup. Standard hot-melt adhesive applies and bonds normally.
Is this the same roll that comes in 328 feet, just shorter?
The 54-foot roll is a short roll sized for smaller runs. The 43 mm width in the Pura Vita program ships in the short-roll format. If you need the full production quantity, check availability of the longer roll in this width before placing a volume order.
The Right Edge for a Real Wood Job
When the panel is real wood veneer, the edge finish deserves the same attention as the face — and a factory-matched ABS band in the correct decor and surface character is the most direct way to keep that standard through the full component.
