1-5/8" Dia x 11/16" Carbide Tipped Traditional Reversible Stile and Rail Assembly, 1/2" Shank
Product Details
Cut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. Features: • 1-5/8" Dia x 11/16" Carbide Tipped Traditional Reversible Stile and Rail Assembly, 1/2" Shank • Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material • Replacement Bearing: 47708 • Flutes: 2 • C: 3/8" • No of Wings: 2
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | 11/16" x 7/8" |
| Width | |
| Cutting Diameter | 1-5/8" |
| Application | |
| Material | |
| Product Type | Traditional Reversible Stile |
| Length | 3" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Product Details
Cut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. Features: • 1-5/8" Dia x 11/16" Carbide Tipped Traditional Reversible Stile and Rail Assembly, 1/2" Shank • Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material • Replacement Bearing: 47708 • Flutes: 2 • C: 3/8" • No of Wings: 2
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | 11/16" x 7/8" |
| Width | |
| Cutting Diameter | 1-5/8" |
| Application | |
| Material | |
| Product Type | Traditional Reversible Stile |
| Length | 3" |
| Degree of Cut | |
| Shank Diameter | 1/2" |