SUPERBRUSH POLY CONVEYOR BELT (36")
Item # SM611007
•Mfr # SUPMX-61-1007
$499.00
/Each
Freight: $45.00
Min Order: 1
Quantity Multiple by: 1
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
The depth of cut has been determined, selecting the proper feed rate is essential. For finish sanding the best finish is usually achieved with a slow to moderate feed rate. This allows for the most revolutions of the drum per inch of sanding. Faster feed rates can be used as long as the machine is not over-stressed. When finish sanding with grits finer than 80, the best finish can usually be obtained if Intellisand does not engage. If Intellisand does slow the conveyor when finish sanding, it is best to make another sanding pass without changing the thickness setting and sand again.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | |
| Power | |
| Frequency | |
| Capacity | |
| Finish | |
| Drum Speed | |
| Blade Diameter | |
| Tank Storage | |
| Speed | |
| Maximum Cutting Length | |
| Maximum Width | |
| Motor Power | |
| Maximum Pressure | |
| Pump Up Time | |
| Arbor Diameter | |
| Arbor | |
| Width | |
| Height | |
| Drive Motor | |
| Belt Size | |
| Depth | |
| Motor Phase | |
| Horsepower | |
| Phase | |
| Range of Speeds | |
| Length | 36" |
| Voltage | |
| Backing Material | Polyurethane |
| Material | |
| Recovery Time |
Item # SM611007
•Mfr # SUPMX-61-1007
$499.00
/Each
Freight: $45.00
Min Order: 1
Quantity Multiple by: 1
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
The depth of cut has been determined, selecting the proper feed rate is essential. For finish sanding the best finish is usually achieved with a slow to moderate feed rate. This allows for the most revolutions of the drum per inch of sanding. Faster feed rates can be used as long as the machine is not over-stressed. When finish sanding with grits finer than 80, the best finish can usually be obtained if Intellisand does not engage. If Intellisand does slow the conveyor when finish sanding, it is best to make another sanding pass without changing the thickness setting and sand again.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | |
| Power | |
| Frequency | |
| Capacity | |
| Finish | |
| Drum Speed | |
| Blade Diameter | |
| Tank Storage | |
| Speed | |
| Maximum Cutting Length | |
| Maximum Width | |
| Motor Power | |
| Maximum Pressure | |
| Pump Up Time | |
| Arbor Diameter | |
| Arbor | |
| Width | |
| Height | |
| Drive Motor | |
| Belt Size | |
| Depth | |
| Motor Phase | |
| Horsepower | |
| Phase | |
| Range of Speeds | |
| Length | 36" |
| Voltage | |
| Backing Material | Polyurethane |
| Material | |
| Recovery Time |