A Full-Sheet A/A Panel Built for Open Casework and A/A Components
The Saviola Canyon Coco A/A decorative panel brings a warm, textured wood look to cabinet boxes, open shelving, and room dividers where both faces land in view. Both sides carry the same Artwood finish in GSD19 Canyon Coco, so no secondary operation is needed to dress the back. At 83-5/16 inch by 110-1/4 inch and 19 mm thick, the sheet sizes well for full-height runs and tall cabinet components.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade on both faces — the same Canyon Coco Artwood decor appears on the front and back, eliminating visible backer on open or A/A components.
- Artwood finish — a textured, embossed surface that follows a wood-pore structure, giving the face tactile depth you can feel under the hand.
- 19 mm thickness — compatible with standard confirmat fasteners and 23 mm edgebanding for a clean square edge.
- 83-5/16 inch by 110-1/4 inch nominal sheet size — a larger format that supports tall cabinet parts and reduces the number of seams in a full-height run.
- Thermally fused laminate construction — the decorative face is fused directly to the core under heat and pressure, with no separate glue line to open at the edge.
- Matching ABS edgebanding available — color-matched banding in the Canyon Coco decor is available to close cut edges so face and edge read as one surface.
Where This Panel Earns Its Place on the Cut List
An A/A panel is the right specification any time a component is seen from more than one angle — open shelving where the underside shows, cabinet end panels in a peninsula layout, room dividers, and freestanding storage units. In a kitchen or bath installation it handles the box itself when the interior is left exposed, and in commercial millwork it covers the backs of display fixtures and retail cases without a secondary finishing step. The large sheet size is particularly useful for tall pantry and wardrobe runs, where a smaller sheet would force a horizontal seam through a prominent face.
Construction and Surface Character
Canyon Coco reads as a warm mid-tone brown with the kind of grain variation that keeps a large face from looking repetitive. The Artwood finish is an embossed texture built to follow a wood-pore structure, deep enough to catch under raking light and to differentiate this panel from a flat-printed alternative. The TFL construction fuses the decorative paper directly to the hardwood particleboard core, so the face is part of the board rather than a sheet bonded on top. That matters at the edge: there is no laminate layer to lift or chip away from the substrate when the panel is machined. The core is CARB2 compliant hardwood particleboard.
Who Specifies This Panel
Cabinet shops running production on open-box designs will cut from this sheet knowing every face that lands in view is finished. Designers specifying warm wood tones for hospitality, multifamily residential, or high-end closet work will find Canyon Coco sits in a neutral register that works beside white, black, and natural stone palettes without competing. The oversize sheet format suits larger commercial shops and industrial cabinet programs better than a standard 4 by 8, and the Saviola collection's consistent construction from sheet to sheet makes color matching across a multi-room project reliable.
Can I use this panel for cabinet interiors as well as the exterior box?
Yes. Because both faces carry the same finish, the panel works equally well as the interior liner of an open cabinet and as the exterior carcass. You are not paying for a back face you then cover up.
Is matching edgebanding available in Canyon Coco?
Yes. Matching ABS edgebanding is available in the Canyon Coco decor for the Saviola collection. ABS is chlorine-free, which clears specifications that exclude PVC.
What edgebanding width do I need for a 19 mm panel?
A 23 mm wide band is the standard pairing for a 19 mm panel. The overhang on each face gives the edgebander enough material to trim flush cleanly.
Does this panel come in an A/B version?
The Saviola collection includes both A/A and A/B panels, but they are separate SKUs with their own sheet dimensions. Confirm the sheet size for any other grade before ordering, as it may differ from this one.
Is matching HPL available for the Saviola collection?
Yes. Matching high-pressure laminate is available in the Saviola collection and ships in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. Order the 60 inch sheet if your shop cannot process the wider format.
The Right Sheet for Work That Shows on Both Sides
Canyon Coco in the A/A grade removes a decision point from open and A/A work — both faces are finished, the Artwood texture holds up under handling and light, and the large sheet format means fewer joins on a tall run. Cut it, band it, and install it.
