Artwood Texture Meets Open-Grain Character for Case and Closet Work
The SALT Saviola Indian Oak Naturale panel brings a tactile, open-pore Artwood finish to a full A/An A/A 19 mm TFL panel. Both faces carry the same Indian Oak Naturale decor, making it the right choice for open shelving, cabinet boxes, and any component where the back edge or reverse face is visible in use. At 83-5/16 inches by 110-1/4 inches, the sheet sizes well for tall cabinet runs and full-height closet parts.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/An A/A construction delivers the Indian Oak Naturale decor on both faces, so either side can show without a secondary finishing step.
- Artwood finish is an open-pore embossed texture that follows the wood grain structure, giving the surface depth and a tactile quality under the hand.
- 19 mm panel thickness suits standard confirmat joinery and pairs directly with 23 mm banding on a square edge.
- 83-5/16 inch by 110-1/4 inch sheet size provides 63.79 square feet per sheet, sized for full-height parts with usable offcuts.
- Thermally fused laminate (TFL) face bonds the decorative paper directly to the core under heat and pressure, with no glue line at the edge.
- Matching ABS edgebanding is available in this color, so cut edges close cleanly in the same decor.
Where Indian Oak Naturale Works in a Build
The Indian Oak Naturale decor reads as a natural, moderately figured oak with the grain variation that makes a wood-look panel convincing at cabinet depth. The Artwood texture reinforces that read by putting a felt pore on the printed grain, so the face holds up under raking light and close inspection. That combination makes this panel well suited to open-shelf units, entertainment centers with visible interior faces, and closet systems where the box interior is seen daily. Because both faces are finished to the same A/A standard, parts that show on two sides, such as room dividers, island end panels, and freestanding bookcases, can be cut directly without planning a show face.
Construction and Core Details
The TFL surface fuses the decorative layer directly to a hardwood particleboard core, eliminating the glue line that a post-bonded laminate would introduce at the edge. The core is CARB2 compliant, which meets the formaldehyde-emission threshold most commercial and residential specifications require. At 19 mm the panel runs through standard panel-processing equipment without modification, and the thickness is correct for confirmat screws and cam-lock fittings used in flat-pack and shop-built casework. The Artwood emboss is pressed in register with the printed grain so the pore follows the oak figure rather than sitting off it.
The Right Buyer for This Panel
Cabinet shops running oak-look programs will find the A/A construction removes a planning step on jobs with visible backs. Designers specifying contemporary interiors with natural wood character get a surface that photographs and presents well without the lead time of real veneer. Closet and storage builders benefit from the large sheet size, which nests tall uprights and shelves efficiently from a single panel. The Indian Oak Naturale color sits in a warm, mid-tone oak range that reads neutrally against white, grey, and natural stone surrounds, giving it broad applicability across kitchen, bath, and living projects.
What does A/A mean on this panel, and how is it different from an A/B panel in the same color?
A/A means both faces carry the Indian Oak Naturale decor at the same appearance grade. An A/B panel has a decorative face on one side and a plain balancing backer on the other. If a component will be seen from both sides, the A/A panel is the correct choice. If only one face ever shows, an A/B panel may suit the job and can differ in sheet size, so confirm which SKU you are ordering.
Is matching edgebanding available for Indian Oak Naturale?
Yes. Matching ABS edgebanding is available for this color in the Saviola collection. ABS banding is chlorine-free and is the standard for this panel program. Confirm the width against your panel thickness when ordering.
What square footage does one sheet cover, and how should I estimate for a job?
Each sheet is 83-5/16 inches by 110-1/4 inches, which the vendor publishes as 63.79 square feet. That figure is the full sheet area, not usable yield after cutting. Cutting loss depends on your layout, so build waste into your estimate before dividing the square footage into job requirements.
Is matching HPL available for this Saviola color?
Yes. Saviola matching HPL is stocked in two sheet sizes: 73 inches by 120 inches and 60 inches by 120 inches. The 60-inch sheet is the practical choice for shops that cannot process the wider panel. Order the HPL alongside the decorative panel to carry the Indian Oak Naturale color onto countertops and high-wear vertical surfaces the TFL panel does not cover.
Does this panel meet CARB2 requirements?
The hardwood particleboard core is CARB2 compliant, which satisfies the formaldehyde-emission threshold required on most residential and commercial projects in the United States.
A Panel That Works Through the Whole Job
Indian Oak Naturale in the Artwood finish gives a build the warmth of an open-pore oak face with the consistency and machinability of a TFL panel, backed by matching edgebanding and HPL so the color carries from panel face to cut edge to countertop without a seam in the design.
