An A/A Decorative Panel For Concrete-Look Casework and Open Shelving
The Saviola A/A decorative panel in Cimento with an Artstone finish brings a textured, concrete-inspired surface to cabinet boxes, open shelving, and interior millwork. At 8 mm thick, it is a lighter panel suited to applications where a thinner profile works in the design's favor, and the A/A grade pair means both faces carry the full decorative surface so any visible side reads correctly.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade pair: Both faces carry the Cimento decor, so the panel works in open-back cabinets, room dividers, and shelving where either side can show.
- Artstone finish: A textured surface in the Artstone family that reads as natural stone or raw concrete under both direct and raking light.
- 8 mm thickness: A slimmer board well suited to back panels, drawer bottoms, and lightweight interior components where full-thickness sheet is unnecessary.
- 83-5/16 inch x 110-1/4 inch sheet size: A large-format panel at 63.79 square feet per sheet, sized to yield efficient parts for tall cabinet runs.
- Thermally fused laminate construction: The decorative face is fused directly to the core under heat and pressure, leaving no glue line and no risk of delamination at the edge.
- Matching ABS edgebanding available: Coordinating banding in the Cimento decor is available to close cut edges so the panel reads as a continuous surface.
Where This Panel Fits the Job
An 8 mm A/A panel occupies a specific place in a cut list. Back panels on frameless cabinet boxes, visible drawer bottoms, thin decorative partitions, and display fixture dividers are where this thickness earns its keep. Because both faces carry the Cimento decor, a back panel that is glimpsed through an open-face cabinet or an open shelf that is seen from above and below does not require a second operation or a separate backer board. The concrete look of the Artstone finish also makes this panel a natural choice for retail fixture work, hospitality millwork, and residential projects where an industrial aesthetic is part of the brief.
Surface, Construction, and the Artstone Finish
Thermally fused laminate bonds the decorative paper directly to the core, so the face and the board move as one. There is no adhesive layer to fail and no film to lift at a cut edge. The Artstone finish family gives the Cimento decor a physical texture that reinforces the stone and concrete character of the color — the surface reads differently under a raking light than a flat matte would, which is the reason this finish family is chosen for material-look programs. Matching ABS edgebanding in the Cimento decor closes the raw edge after cutting, carrying the same texture and tone from face to edge.
Who Orders This Panel
Cabinet shops specifying a contemporary interior often need a dedicated back-panel and partition material that matches their door and drawer-front program without adding weight or cost. The 8 mm Saviola A/A in Cimento fills that role in a concrete-look scheme. Retail fixture builders and display fabricators also find it useful where thin dividers and shelving need a finished face on both sides. Designers working on residential kitchens, closets, and bath vanities that call for an industrial material palette can specify this panel with confidence that the cut-list math works out on the large-format sheet.
What does the A/A grade pair mean on this panel?
A/A means both faces carry the Cimento decor to the same appearance standard. Either face can be the show face, which is what makes this panel useful for open shelving, room dividers, and cabinet backs that are visible from inside.
Is 8 mm thick enough for a structural cabinet back?
An 8 mm panel is the right thickness for a dadoed-in back panel on a standard frameless cabinet box. For a back that is face-stapled or glued rather than dadoed, confirm the frame's structural design with your shop drawings before specifying.
Does matching edgebanding exist for the Cimento color?
Yes. Matching ABS edgebanding is available in the Cimento decor for the Saviola collection. ABS is chlorine-free and clears specifications that exclude PVC banding.
How does the Artstone texture hold up to everyday handling?
Thermally fused laminate surfaces are built for cabinet and fixture work. The textured Artstone face handles normal shop fabrication and everyday use in interior casework. This panel is for indoor applications only.
How many square feet does one sheet cover?
The nominal sheet at 83-5/16 inch by 110-1/4 inch covers 63.79 square feet. Use that figure for quoting and estimating; usable yield after cutting depends on your specific layout.
The Right Panel for a Concrete-Look Build
When the job calls for a concrete or stone aesthetic on both faces of a thin panel component, the Saviola A/A in Cimento with the Artstone finish delivers a consistent, fabrication-ready surface that pairs directly with matching edgebanding and works within a standard large-format cut list.
