P-System 16mm x 50mm x 85mm CNC Cutter Arbor
Item # CS132152
•Mfr # 132152
$292.22
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbour is used the dimensions of which vary according to the unit and machine type.
The 6mm carbide drill is used for angles of up to 30? without deflecting when it hits the work piece surface. This is necessary for miter joints and other angled connections since the tool openings are at the same angle as the cut, thus presenting a risk of drill slippage.
The 6mm carbide drill is used for angles of up to 30? without deflecting when it hits the work piece surface. This is necessary for miter joints and other angled connections since the tool openings are at the same angle as the cut, thus presenting a risk of drill slippage.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | CNC Cutter Arbor |
| Length | 85mm |
| Width | |
| Diameter | |
| Thickness | |
| Wood Species |
Item # CS132152
•Mfr # 132152
$292.22
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbour is used the dimensions of which vary according to the unit and machine type.
The 6mm carbide drill is used for angles of up to 30? without deflecting when it hits the work piece surface. This is necessary for miter joints and other angled connections since the tool openings are at the same angle as the cut, thus presenting a risk of drill slippage.
The 6mm carbide drill is used for angles of up to 30? without deflecting when it hits the work piece surface. This is necessary for miter joints and other angled connections since the tool openings are at the same angle as the cut, thus presenting a risk of drill slippage.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | CNC Cutter Arbor |
| Length | 85mm |
| Width | |
| Diameter | |
| Thickness | |
| Wood Species |