A/A Decorative Panel For Open Casework and Visible Interiors
The Saviola GSAH7 Biscotto panel delivers a warm, neutral grain on both faces, making it the practical choice whenever a finished surface needs to show on more than one side. At 8 mm thick, it fits lightweight cabinet boxes, shelf components, and partitions where both faces land in plain view and an A/B panel simply will not do.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- A/A grade construction means the same decorative face appears on both sides, so no planning is required to hide a backer face.
- Loom finish gives the surface a fine, woven-textile texture that pairs well with understated wood and solid-color surroundings.
- 83-5/16 inch x 110-1/4 inch sheet size yields generous parts from a single sheet without a secondary cut to square the blank.
- 8 mm thickness keeps weight down on tall shelf runs and lightweight door components while still accepting standard fasteners.
- Thermally fused laminate construction bonds the decorative face directly to the core with no glue line to open at the edge.
- Matching ABS edgebanding is available in this color, so cut edges close cleanly in the same decor.
Where This Panel Fits the Job
An A/A panel earns its place anywhere both faces are in play. Open shelving units visible from the front and sides, room dividers, display cabinet boxes, and furniture backs that face into a room all call for a panel that reads correctly from either direction. The Biscotto color, a warm biscuit-toned grain, works naturally in kitchen, bath, closet, and retail fixture work where a clean neutral sets the tone without competing with hardware or accent materials. At 8 mm, the sheet is also well suited to drawer box sides and lightweight partitions that need a finished appearance on each face without the weight of a full 19 mm board.
Surface, Core, and Construction
Saviola panels use thermally fused laminate construction: the decorative paper is pressed directly into the core under heat, becoming part of the board rather than a separate layer bonded on top. The Loom finish adds a light textile-relief texture that reduces glare and gives the surface a tactile quality flat mattes do not have. The 8 mm core is a hardwood particleboard substrate that holds a confirmat or cam fastener well across the sheet. This panel is for indoor cabinetry and millwork. Edgebanding in the GSAH7 Biscotto decor is available as matching ABS strip, so face and edge read as a single surface after trimming.
Who Reaches for This Panel
Cabinet shops building high-volume closet and display casework appreciate the A/A grade because it removes the orientation step from cutting and assembly, which matters on a long run. Designers specifying furniture-style pieces, retail millwork, or open-concept storage reach for Biscotto when the palette calls for a warm neutral that does not read as painted or solid. Contractors finishing out a commercial or residential interior value the large sheet size, which reduces the seam count on wide installations. The 8 mm thickness is especially useful for shops building lightweight components that still need a presentable face on both sides.
Does an A/A panel cost more than an A/B panel in the same color?
A/A panels carry a decorative face on both sides, which affects the panel construction compared to an A/B sheet with a plain backer. Check the current price on the product page — pricing reflects the grade and sheet size.
What does the Loom finish feel like, and does it affect edgebanding selection?
The Loom finish is a light textile-relief texture, finer than a wood-pore emboss and distinct from a flat matte. It does not change the edgebanding width you need — match edgeband width to panel thickness as usual. Matching ABS edgebanding in GSAH7 Biscotto is available and will carry the same color across the edge.
Can this panel be used for drawer box sides?
Yes. At 8 mm, the Biscotto A/A panel is well suited to drawer box sides, lightweight partitions, and back panels where a finished face on both surfaces is needed without the weight of a thicker board. Confirm your fastener and joint type against the 8 mm thickness before committing the layout.
Is matching HPL available for Saviola panels?
Yes. Saviola matching high pressure laminate is stocked in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. Order the 60 inch sheet if your shop cannot process the wider format. Confirm the GSAH7 Biscotto color availability in HPL at the time of order.
The Right Panel Arrives Ready to Cut
A finished face on both sides, a warm neutral grain, and a sheet sized for real cabinet layouts — the Saviola GSAH7 Biscotto A/A panel gets to the saw table with the orientation decision already made.
