Wide-Format ABS Edgebanding for Thick Panels and Tall Edges
This Saviola ABS edgebanding in color GSAH7 Biscotto is the 65 mm width, cut to cover the exposed edge of thicker panels or to band a double-layered component in a single pass. The 1 mm ABS strip is produced to match the Saviola decorative panel collection, so face and edge read as one continuous surface. Each roll delivers 328 linear feet, giving a busy shop enough coverage to run through a full production run without a mid-job resupply.
Key Features
- 65 mm width provides ample overhang for trimming flush on panels thicker than 19 mm or on built-up edge assemblies.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and holds a clean color match to the Saviola panel face.
- Loom finish replicates the surface texture of the matched Saviola panel decor so the edge integrates visually rather than reading as a separate material.
- 328-foot roll supports high-volume production runs and reduces roll changes on long panel runs.
- Color GSAH7 Biscotto is a warm neutral that pairs across a wide range of cabinet and millwork applications in the Saviola collection.
Where the 65 mm Width Earns Its Place
Most ABS edgebanding programs lead with a 23 mm width sized for standard 19 mm panels, and a 43 mm width for taller or stacked edges. The 65 mm width exists for situations neither of those covers. A double-thickness countertop build-up, a laminated beam wrap, a partition panel where two boards are face-bonded — these assemblies push the edge beyond what a 43 mm band can cleanly close. Banding a 38 mm or 40 mm built-up edge with a 65 mm strip leaves enough overhang to trim both faces flush in a single machine pass without chasing a narrow margin. It also works as a safety margin on very wide decorative edge profiles where a narrower band would risk trimming into the face.
Material and Finish Details
ABS is the preferred polymer for edgebanding in specifications that exclude PVC, and the chlorine-free composition clears most commercial and institutional requirements. The 1 mm thickness sits in the working range for both automated edgebanders and hand-applied methods, bonding reliably with standard hot-melt systems. The Loom finish on this strip is matched to the Saviola panel production run for GSAH7 Biscotto, so the surface texture and gloss level align with the panel face rather than simply approximating the color. Biscotto is a warm, light neutral with an organic undertone — a tonal family that reads well against natural wood components and stays versatile across both contemporary and transitional cabinet styles.
Production Shops and Specification Work
A 328-foot roll at 65 mm is a production quantity. Small shops cutting a few panels in a single color may find the shorter roll a better fit if it is available in this width. For shops running the Saviola collection regularly — closet manufacturers, commercial casework fabricators, millwork operations specifying a warm neutral across a multi-room or multi-unit job — the 328-foot roll reduces the handling overhead and keeps a consistent dye lot on hand. Specifiers matching edgebanding to a Saviola panel order should confirm the color code GSAH7 on both the panel and banding purchase to ensure the dye lot tracks correctly.
Can I use this 65 mm banding on a standard 19 mm panel?
Yes. The extra width trims away cleanly on a thinner panel — you simply remove more overhang. The practical trade-off is a slightly longer trim pass, which most edgebanders handle without adjustment. The 23 mm width is more economical for standard thickness work, but the 65 mm band produces the same finished edge.
Does this banding come pre-glued?
No. This is unglued ABS banding intended for use with an edgebander or a glue pot. It is not an iron-on product. Apply it with a hot-melt adhesive system for a durable, production-quality bond.
Is this the right banding to match Saviola GSAH7 Biscotto panels?
Yes. This banding is produced in the Saviola program specifically to match GSAH7 Biscotto panel decor. Confirm the color code on your panel order to make sure both items share the same production color.
Why does this listing appear under ABS edgebanding if the site category shows PVC?
The product is ABS edgebanding. ABS is chlorine-free and is distinct from PVC, which contains chloride. This banding is appropriate for specifications that require a PVC-free edge material.
The Right Edge for the Panel You Already Chose
Matching edgebanding is the last step that makes a decorative panel read as a finished component rather than a faced board. The Saviola GSAH7 Biscotto banding at 65 mm closes the edges that narrower widths cannot, letting a production shop stay within one color family from face to edge regardless of panel thickness or build-up depth.
