SM'art Decorative Panel For Warm-Toned Cabinet and Millwork Faces
The SALT SM'art Cannella panel brings a warm, medium-brown wood tone to cabinet boxes, shelving, and millwork components that need a finished face on both sides. Built as an A/A panel, it carries the same decorative surface on each face, so open shelving, room dividers, and cabinet interiors read cleanly from every angle without a second operation.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 50% post-consumer recycled core — half the core content is reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A construction: Both faces carry the Cannella decor, so either side can show without additional work.
- Intagli finish: A structured surface texture with tactile depth suited to wood-look cabinet and furniture applications.
- 19 mm thickness: Pairs directly with standard confirmat fasteners and 23 mm edgebanding for clean, square-edge construction.
- Large-format sheet: The 81-1/2 inch x 120-5/64 inch nominal size yields long cabinet parts and full-height components from a single sheet.
- Thermally fused laminate surface: The decorative face is fused directly to the core under heat and pressure, leaving no glue line at the edge.
- Matching ABS edgebanding available: SM'art offers color-matched ABS banding in this decor to close cut edges consistently.
Where Cannella Works in a Cabinet or Millwork Run
Cannella is a warm, earthy brown tone that reads naturally in kitchens, residential built-ins, and retail fixtures where a wood-look surface needs to hold up to daily contact. The Intagli texture adds enough relief to disguise minor handling marks and give the surface a hand-feel that a flat matte face does not. Because this is an A/A panel, it is the right call for open-back cabinet boxes, double-faced shelving units, and peninsula panels where the back is as visible as the front. A single sheet covers both faces of a component, which simplifies the cut list and eliminates a separate backer operation.
Surface, Core, and Construction
The SM'art collection is built on a TFL construction: a decorative paper impregnated with melamine resin is fused directly to the substrate under heat and pressure, becoming part of the board rather than a separate sheet bonded with adhesive. That means the edge of the panel shows core material rather than a delaminating glue line, and edgebanding applied over the core bonds to a uniform surface. The 19 mm thickness is the standard cabinet-box dimension in this collection, compatible with typical shelf-pin boring, confirmat and cam-lock joinery, and 23 mm ABS banding trimmed flush on both faces. The Intagli finish is a structured emboss applied across the face, giving Cannella the tactile character that makes a printed wood surface read as more than a flat graphic.
The Buyer This Panel Is Built For
Cabinet shops running warm-toned residential work will find Cannella a practical anchor color: it coordinates with a broad range of door styles and hardware finishes without pulling toward red or gray. Millwork and fixture shops specifying a durable, low-maintenance wood-look surface will benefit from the TFL construction, which requires no field finishing and arrives ready to cut and band. Designers specifying for kitchen renovations or commercial casework projects can rely on the A/A grade pair to simplify shop drawings, since component orientation does not need to track a show face through every cut. The large sheet size reduces the number of sheets needed for a long run of full-height panels.
What does the A/A grade pair mean on this panel?
A/A means both faces are finished to the same decorative standard in the Cannella decor. Either face can be the show face, which is different from an A/B panel where one face is finished to a secondary standard.
Is matching edgebanding available for Cannella?
Yes. SM'art offers matching ABS edgebanding in the Cannella decor. ABS is chlorine-free, which clears specifications that exclude PVC banding.
Does SM'art have a matching HPL sheet in this color?
SM'art matching HPL is available in a 60 inch by 120 inch sheet, which lets you carry the Cannella color onto a countertop or high-wear horizontal surface the panel program does not cover on its own.
What edgebanding width does a 19 mm panel require?
A 23 mm band is standard for a 19 mm panel. It trims flush on both faces with enough overhang to clean up cleanly after the edge run.
How does TFL construction affect edge treatment?
Because the decorative face is fused to the core rather than glued down as a separate sheet, there is no adhesive layer to open at the cut edge. The exposed core takes ABS or PVC banding the same way raw particleboard does, and the bond is consistent across the full edge.
One Sheet, Both Faces Finished and Ready to Build
The SM'art Cannella A/A panel arrives with both faces complete, so the shop's job is cutting and banding — not finishing, backing, or orienting. For a warm-toned wood look that works across residential cabinet boxes, open shelving, and commercial millwork without extra operations, this panel earns its place on a steady cut list.
