A/A Italia-Finish Panel Built for Both-Face Casework
The SALT SM'art Torino panel is a thermally fused laminate decorative panel finished on both faces in the Italia surface, sized at 81-1/2 inch x 120-5/64 inch at 8 mm thick. Because both faces carry the same Torino decor, it works wherever a component must read correctly from every angle — open shelving, room dividers, cabinet box interiors, and furniture carcasses where the back wall shows.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 50% post-consumer recycled core — half the core content is reclaimed wood fiber.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/An A/A construction means both faces carry the same Torino decor, so either face can be the show face.
- Italia finish delivers a tactile surface character coordinated across the SM'art collection for consistent texture at panel joints.
- 81-1/2 inch x 120-5/64 inch sheet size provides a larger-than-standard footprint that supports tall-format parts and reduces seams on full-height applications.
- 8 mm thickness suits back panels, sliding doors, lightweight furniture backs, and anywhere a thinner board reduces weight without sacrificing flatness.
- Matching ABS edgebanding is available in this color to close cut edges and keep the Torino decor continuous across the panel face and edge.
- CARB2 compliant core meets the formaldehyde emissions standard required on most residential and commercial specifications.
Where This Panel Fits the Work
At 8 mm, this panel earns its place wherever a full 19 mm board would add unnecessary weight or bulk. Cabinet back panels, adjustable shelf dividers, sliding door blanks, and furniture dust panels are natural fits. The tall sheet — over 10 feet long — lets a shop cut multiple full-height back panels from a single sheet with minimal waste. On a room divider or open bookcase where both sides face traffic, the A/A construction eliminates any orientation decision at the saw. The Torino decor reads as a consistent surface regardless of which face the installer turns outward.
Surface, Construction, and the Italia Finish
TFL bonds the decorative face directly to the core under heat and pressure, so there is no separate sheet to delaminate and no glue line visible at the edge. The Italia finish is a SM'art collection texture family — a surface emboss shared by multiple colors in the line, which means a Torino panel meets a neighboring SM'art panel at a joint without a texture break. That consistency matters on a run of doors or a wall-cladding layout where panels abut. Matching ABS edgebanding is produced in the Torino decor for this collection, so a square-edged component closes out without a visible color change at the banding strip.
Who Orders This Panel
Cabinet shops running furniture-grade casework or closet systems reach for this SKU when a back panel or divider needs to hold its own visually rather than disappear behind a face frame. Designers specifying open shelving or A/A room partitions value the A/A grade because it removes any hidden-face compromise from the layout. Residential contractors fitting out a display case or a built-in entertainment wall use the oversized sheet to minimize horizontal seams on a tall run. Wherever the finished piece will be seen from two sides — or wherever rework from installing the wrong face is not an option — an A/A panel is the straightforward choice.
What does A/A mean on this panel?
A/A indicates that both faces carry the same Torino decor to the same appearance grade. Either face can be the show face, so there is no wrong way to orient the panel during installation.
Is matching edgebanding available for Torino?
Yes. Matching ABS edgebanding is available in the Torino color for the SM'art collection. ABS is chlorine-free, which clears specifications that exclude PVC.
Is 8 mm thick enough for a cabinet back panel?
For most residential and light-commercial cabinet boxes, 8 mm is a standard back-panel thickness. It keeps the carcass light and takes a common fastener without issue. If the application requires a thicker back for structural reasons, SM'art panels are also available in 19 mm.
Does SM'art Torino have matching HPL?
SM'art matching HPL is available in 60 inch by 120 inch sheets and is a separate SKU. It lets you carry the Torino color onto a countertop or high-wear horizontal surface the panel program does not cover on its own.
What is the published square footage for this sheet?
The sheet dimensions are 81-1/2 inch x 120-5/64 inch. Square footage per sheet is not published in the source data for this SKU — check the product spec block or contact your sales representative for the coverage figure you need for estimating.
The Right Panel for Work That Shows on Both Sides
When the job calls for a panel that performs front and back without compromise, the SM'art Torino A/A in 8 mm delivers the surface consistency, the oversized sheet footprint, and the available matching edgebanding to carry a clean finish all the way to the edge.
