Intagli-Finish Decorative Panel for Bold, A/A Casework
The SM'art SMIN90 Noir panel brings a deep black Intagli-textured face to both sides of an 8 mm board, making it the right sheet when color and finish have to read correctly whether a component faces in or out. At 81-1/2 inch by 120-5/64 inch, the panel ships A/A — the same decorative face and finish on both sides — so the layout never has to protect a hidden back face.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 50% post-consumer recycled core — half the core content is reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade pair: Both faces carry the Intagli finish and SMIN90 Noir decor, so either side can land as a show face.
- Intagli texture: A deep, structured surface emboss that adds tactile depth to the black face and holds up under raking light.
- 8 mm thickness: A slim profile suited to door fronts, back panels, and lightweight structural components where a full 19 mm board is unnecessary.
- 81-1/2 inch by 120-5/64 inch sheet: A tall, wide format that nests full-height door blanks and long shelf runs from a single sheet.
- TFL construction: The Intagli face is thermally fused directly to the core, so there is no glue line to open at the edge or corner.
- Matching ABS edgebanding available: SMIN90 Noir edgebanding from the SM'art program closes cut edges in the same decor.
Where the Intagli Surface Does Its Best Work
The Intagli texture is a deep, relief-pressed emboss — not a printed texture but a physical surface that catches light differently depending on the angle. On a black panel that effect is pronounced: matte areas read almost flat, while the raised structure picks up highlights and breaks what would otherwise be a uniform dark plane. That makes SMIN90 Noir in the Intagli finish a strong choice for door fronts in contemporary kitchens and bath vanities, for display cabinet backs where depth matters visually, and for open shelving where both the top and bottom face of a shelf are seen. The A/A construction earns its place in any application where flipping a sheet to hide a plain backer is not an option — partition panels, room dividers, and A/A display cases all fit that description.
Construction and Sheet Specifics
At 8 mm, this panel is thinner than a standard cabinet-box board and is proportioned for components that need the Noir decor without the weight or material cost of a thicker sheet. The TFL face is fused to the core, not adhered as a separate laminate, which means the bond between the Intagli surface and the substrate is structural rather than adhesive. The 81-1/2 inch by 120-5/64 inch format is sized for tall work: a full-height door blank or a floor-to-ceiling back panel can often come out of a single sheet with a usable offcut. Edgebanding in SMIN90 Noir is available through the SM'art program in matching ABS, so cut edges can be closed in the same decor without sourcing a close-but-not-exact third-party color.
Who Specifies This Panel
Cabinet shops building contemporary door fronts or open shelving units reach for this sheet when the design calls for a consistent black face on every visible surface. Designers specifying handleless kitchen programs use the Intagli texture to add tactile interest without introducing a second material. Commercial millwork fabricators working on retail fixtures and display cases appreciate the A/A construction because it eliminates the need to track face orientation through the cut list. At 8 mm, the panel is also practical for insert panels, back walls of display niches, and any component where a full-thickness board would add unnecessary weight to the assembly.
Does the Intagli texture run in a direction, and does that affect layout?
Yes. The Intagli emboss has a grain direction, and panels cut for the same job should be oriented consistently so the texture reads in one direction across the finished assembly. Mark your cut list with the panel direction before going to the saw.
Is 8 mm thick enough for a cabinet door front?
For flat slab doors on frameless cabinets, 8 mm works well when the door is sized and edgebanded correctly. It is lighter than a 19 mm door and suits tall, narrow door designs where flex could be a concern with thinner material. Confirm the hinge and hardware specifications support an 8 mm door thickness before ordering.
What edgebanding matches SMIN90 Noir?
Matching ABS edgebanding is available for SM'art colors including SMIN90 Noir. The SM'art program offers edgebanding in 23 mm, 43 mm, and 65 mm widths on 328 foot rolls, and in 43 mm and 65 mm widths on 54 foot rolls.
Is matching HPL available for SM'art panels?
SM'art HPL is available in 60 inch by 120 inch sheets and can carry the color onto countertops and other horizontal surfaces the panel program does not cover directly.
Does SMIN90 Noir have a water-resistant core?
The source data for this SM'art panel does not publish a water-resistance hour rating for this specific SKU. If moisture exposure is a requirement for the application, confirm the core specification before specifying.
A Finished Sheet That Works From Every Angle
The SM'art SMIN90 Noir Intagli panel delivers a consistent, A/A black surface with real tactile character — the kind of detail that makes a contemporary cabinet or display piece read as a considered design rather than a production run.
