Saviola TFL Panel For Casework That Shows on Both Sides
The Saviola A/A decorative panel in Como with a Chandler finish is an A/A thermally fused laminate board designed for cabinet boxes, open shelving, room dividers, and any component where both faces are visible. At 83-5/16 inches by 110-1/4 inches and 19 mm thick, it ships ready to cut and band with no additional surfacing step required.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade construction puts the same Chandler-finish Como decor on both faces, so either side can face out.
- Thermally fused laminate surface bonds the decorative face directly to the core under heat and pressure, leaving no glue line to open at the edge.
- 19 mm thickness pairs with standard 23 mm edgebanding and accepts confirmat fasteners without pre-drilling a pilot in a separate operation.
- Large-format sheet at 83-5/16 inches by 110-1/4 inches yields 63.79 square feet per sheet, supporting tall cabinet runs and full-height closet parts from a single sheet.
- Chandler textured finish delivers a consistent surface character across the sheet for a clean, professional appearance on finished ends and exposed interiors.
- Matching ABS edgebanding is available in this color, so the cut edge reads as one surface with the face.
Where This Panel Performs
A/A construction is the right choice whenever a panel is visible from more than one angle. Cabinet boxes where the interior and exterior both show, open shelving in a retail fixture or pantry, room dividers, and furniture pieces with exposed backs all put both faces in plain sight. The Como decor in a Chandler finish gives these applications a consistent, finished look without the extra step of applying a backer or planning the layout to hide an A/B reverse. The large sheet size also supports full-height closet end panels and tall wardrobe components that would require a seam on a standard 4-by-8 sheet.
Surface, Core, and Construction
The Saviola collection uses thermally fused laminate, where the decorative paper and melamine resin fuse directly to the substrate under heat and pressure. The result is a surface that is part of the board rather than a layer sitting on top of it, which keeps the edge profile clean and eliminates the delamination risk of a separately bonded face. The Chandler finish adds a defined surface texture that holds up to shop handling and everyday cabinet use. The 19 mm particleboard core is CARB2 compliant, meeting the formaldehyde emissions requirement on commercial and residential specifications alike. At this thickness the board machines predictably, holds a screw without splitting at the edge zone, and stays flat across a wide sheet.
Who Reaches for This Panel
Cabinet shops running production box work rely on the A/A grade to skip the sidedness decision entirely: every sheet is orientable either way, which simplifies the cut list and reduces the chance of a miscut becoming scrap. Designers specifying built-ins, open shelving, or furniture-grade casework use it where both faces land in the client's line of sight. Contractors sourcing for a commercial fit-out appreciate the large format because fewer sheets means fewer seams to manage on a long wall or a bank of cabinets. The Como color and Chandler finish suit contemporary and transitional interiors where a clean, uniform surface reads as intentional rather than economical.
What does A/A grade mean on a Saviola panel?
A/A means the same decorative face and finish appear on both sides of the sheet. Either face can show without a second operation or a concealment strategy in the layout.
Is matching edgebanding available for Como?
Yes. Saviola matching ABS edgebanding is available in this color. Apply it to every cut edge that will be visible to close the core and carry the Como decor across the full component.
How many square feet does one sheet cover?
The 83-5/16 inch by 110-1/4 inch sheet is 63.79 square feet. That figure is the full sheet area; your usable yield depends on the cut list and the parts you are nesting.
What edgebanding width works with 19 mm panels?
A 23 mm wide band is standard for a 19 mm panel. It overhangs both faces enough to trim flush cleanly on an edgebander or by hand.
Is this panel suitable for kitchen or bath cabinet boxes?
The panel is well suited to kitchen cabinet boxes and other interior casework. For applications with sustained moisture exposure, such as a vanity under a sink, confirm the core's water resistance specification against the demands of the specific installation before committing.
A Panel That Earns Its Place in the Cut List
The Saviola A/A panel in Como removes the layout constraint that comes with an A/B sheet. Both faces are finished, the sheet is large enough to handle tall parts, the core machines and fastens predictably at 19 mm, and matching edgebanding ties the edge to the face. It is a straightforward panel for work that has to look right from every angle.
