Saviola TFL Decorative Panel For Open Casework and Visible Interiors
The Saviola A/A decorative panel in GSAG4 Ancona with Chandler finish is a thermally fused laminate panel finished on both faces, sized at 83-5/16 inches by 110-1/4 inches in a 19 mm thickness. With an A-grade decorative face on both sides, this panel is built for components where either surface may be seen — open shelving, room dividers, cabinet boxes with visible interiors, and frameless casework that reads from multiple angles.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/An A/A construction means both faces carry the same A-grade Ancona decor, so no face is ever a hidden back.
- Chandler finish brings a textured, wood-grain surface character that adds tactile depth to the Ancona color.
- 83-5/16 inch by 110-1/4 inch nominal sheet size yields 63.79 square feet per sheet, sized for tall cabinet runs and full-height parts.
- 19 mm panel thickness is compatible with standard confirmat fasteners and pairs with 23 mm edgebanding for a clean square edge.
- Matching ABS edgebanding is available in the Ancona color, so cut edges close out to the same decor without a visible seam.
- CARB2 compliant hardwood particleboard core meets formaldehyde emission requirements for residential and commercial specifications.
Where This Panel Fits in a Project
An A/A panel earns its place anywhere a single sheet is viewed from both sides. Open bookshelves, freestanding room dividers, kitchen island end panels, and retail fixture shelving all expose the back face to view — an A/B panel with a backer falls short in those situations. The 83-5/16 by 110-1/4 inch sheet handles a full-height closet carcass or a tall pantry wall with parts to spare, and the large format reduces the number of seams in a continuous run. The Chandler finish texture also softens flat planes under raking light, which matters on doors and large side panels where a smooth gloss surface would telegraph every mill mark.
Material, Core, and Surface Construction
The Ancona decor is a thermally fused laminate face, meaning the decorative paper is pressed directly into the board under heat — there is no separate adhesive layer and no glue line to open at the cut edge. The Chandler finish adds a structured texture over the print, giving the surface a tactile quality that reads differently from a smooth or super-matte face. The core is CARB2 compliant hardwood particleboard, which holds a machine-driven fastener reliably across a wide carcass and stays flat in normal indoor conditions. At 19 mm the board is the right thickness for cabinet box construction, confirmat joinery, and shelf pins without the weight penalty of a thicker slab. This panel is intended for interior, dry applications.
Who Orders This Panel and Why
Cabinet shops running production casework reach for A/A panels when the job spec calls for open storage or when the designer has not confirmed which faces will be hidden. Ordering A/A throughout a job eliminates the planning step of tracking face orientation at the saw, and it covers the cases where a field change exposes a back face that was supposed to be concealed. Closet designers building systems with visible shelf undersides, furniture makers constructing free-standing pieces, and millwork shops building retail fixtures all share the same need: a panel that looks finished from any angle. The large sheet format and the 63.79 square-foot coverage also make this a practical choice for shops optimizing cut yield on tall parts, where a standard 4 by 8 sheet forces a seam.
What does A/A mean on a Saviola panel?
A/A identifies the grade pair: both faces carry the same A-grade decorative surface. Either face can show without a visible quality difference, which is what separates it from an A/B panel where one face is finished to a looser standard.
Is matching edgebanding available for Ancona GSAG4?
Yes. Matching ABS edgebanding is available in the Saviola collection for this color. It closes cut edges in the same decor so the panel reads as a continuous surface rather than a faced board.
Is matching high pressure laminate available for this color?
Matching HPL is available for the Saviola collection and ships in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. Order the 60 inch sheet if your shop cannot process the wider format.
Can this panel be used in a bathroom or kitchen?
The CARB2 hardwood particleboard core is suitable for dry interior environments. It is not rated for direct moisture exposure, so keep it away from splash zones and areas with sustained humidity.
How much coverage does one sheet provide?
The nominal sheet size of 83-5/16 inches by 110-1/4 inches gives 63.79 square feet per sheet. Your usable yield depends on your cut list — the published square footage is sheet area, not net yield after kerf and trim.
A Panel That Works Without a Plan for Which Face Shows
The Saviola A/A panel in Ancona with Chandler finish removes one decision from the job: which face goes out. Both faces are finished, both are A-grade, and matching edgebanding is there to close the edges when the cuts are done.
